Loading the interactive model…
Interactive 3D model of Futuristic Slanted Robot Chassis – Wide & ShallowEverything else
Futuristic Slanted Robot Chassis – Wide & Shallow
18 views
- Bounding box
- 140.1 × 85.1 × 240.1 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
make the lenght a little small but a longer breadth
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width (X) | 140 mm | 80 – 200 |
| Outer Depth (Y) | 85 mm | 60 – 150 |
| Half Height (bottom part) | 80 mm | 50 – 120 |
| Wall Thickness | 3 mm | 1 – 5 |
| Snap Lip Height | 2 mm | 1 – 4 |
| Snap Lip Width | 2 mm | 1 – 4 |
| Taper Angle (deg) | 15 deg | 5 – 30 |
| Vertical Edge Fillet | 5 mm | 2 – 10 |
| Top/Horiz Edge Fillet | 3 mm | 1 – 8 |
| Sensor Hole Diameter | 16.5 mm | 10 – 20 |
| Sensor Hole Spacing | 40 mm | 20 – 80 |
| Sensor Holes Z Center | 140 mm | 100 – 170 |
| Display Cutout Width | 70 mm | 40 – 100 |
| Display Cutout Height | 42 mm | 30 – 80 |
| Display Z Center | 110 mm | 70 – 150 |
| Audio Hole Diameter | 2 mm | 1 – 4 |
| Audio Grid Width | 30 mm | 10 – 60 |
| Audio Grid Height | 30 mm | 10 – 60 |
| Audio Grid Spacing | 4 mm | 2 – 8 |
| Audio Grid Z Center | 70 mm | 40 – 100 |
| Camera Hole Diameter | 9 mm | 5 – 15 |
| Camera X Center | 70 mm | 30 – 110 |
| Camera Y Center | 42.5 mm | 20 – 65 |
| Standoff Spacing X | 58 mm | 30 – 90 |
| Standoff Spacing Y | 49 mm | 30 – 80 |
| Standoff X Center | 70 mm | 30 – 110 |
| Standoff Y Center | 42.5 mm | 20 – 65 |
| Standoff Height | 8 mm | 4 – 15 |
| Standoff Diameter | 6 mm | 3 – 10 |
| Floor Slab Length (X) | 80 mm | 50 – 120 |
| Floor Slab Width (Y) | 60 mm | 30 – 90 |
| Floor Slab Thickness | 3 mm | 1 – 6 |
| Floor Slab Z Position | 6 mm | 1 – 15 |
| Battery Slot Length | 45 mm | 30 – 60 |
| Battery Slot Width | 30 mm | 20 – 40 |
| Battery Slot Depth | 8 mm | 3 – 12 |
| Mounting Hole Dia | 3.5 mm | 2 – 5 |
| Cable Channel Dia | 8 mm | 4 – 12 |
| Channel 1 X | 30 mm | 10 – 80 |
| Channel 1 Y | 30 mm | 10 – 70 |
| Channel 2 X | 110 mm | 60 – 130 |
| Channel 2 Y | 55 mm | 30 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS