FTC Intake Wheel One-Piece Mold 4.5 inch EXACT 114.3mm

1 views

Bounding box: 134.3 × 134.3 × 17.7 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

Exact 4.5-inch version of the existing one-piece mold. Maximum outside diameter measured across the outer rounded tabs/spikes is exactly 114.3 mm. No other geometry or dimensions changed.

Parameters

Name	Value	Range
Overall wheel diameter including rounded rim tabs	114.3 mm	90 – 140
Cast wheel thickness / mold cavity depth	12.7 mm	6 – 20
Circular center hub outside diameter	19.5 mm	12 – 30
Number of curved spokes	12 mm	6 – 18
Curved spoke width	6.5 mm	3 – 10
Tangential spoke sweep from hub to rim	-20 deg	-35 – 35
Outer ring radial width	5 mm	3 – 9
Rounded outer tab count	12 mm	6 – 18
Rounded tab radial length	7 mm	4 – 12
Rounded tab tangential width	5.5 mm	3 – 9
Rounded tab corner radius	1.3 mm	0.5 – 2
REX round envelope with casting clearance	8.1 mm	8 – 8.5
REX hex across flats with casting clearance	7.1 mm	7 – 7.5
Border around the wheel cavity	10 mm	6 – 20
Solid floor under the cavity	5 mm	3 – 10
Mold outside corner radius	3 mm	1 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS