Everything else
FTC BioBuzz Intake + Launcher Robot
- Bounding box
- 445.0 × 340.0 × 220.6 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Build a robot CAD design for FTC Biobuzz with intake and launcher
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length (X) | 340 mm | 200 – 450 |
| Chassis Width (Y) | 340 mm | 200 – 450 |
| Deck Plate Thickness | 6 mm | 3 – 15 |
| Deck Corner Fillet | 4 mm | 0 – 12 |
| Side Wall Length | 240 mm | 80 – 440 |
| Side Wall Height | 90 mm | 20 – 200 |
| Wall Thickness | 6 mm | 3 – 15 |
| Intake Rail Length | 140 mm | 60 – 260 |
| Intake Rail Height | 70 mm | 30 – 140 |
| Intake Roller Diameter | 50 mm | 20 – 90 |
| Intake Roller Length | 330 mm | 200 – 450 |
| Roller Axle Spacing | 65 mm | 30 – 140 |
| Launcher Tube Size | 90 mm | 40 – 160 |
| Launcher Tube Length | 200 mm | 80 – 320 |
| Launch Angle | 30 deg | 5 – 75 |
| Tube Offset From Rear | 70 mm | 30 – 150 |
| Flywheel Diameter | 80 mm | 20 – 140 |
| Flywheel Thickness | 25 mm | 5 – 50 |
| Flywheel Axle Offset | 70 mm | 0 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm