Everything else
FTC 3.5in 12 Spokes Tabs Centered in Gaps 16mm
- Bounding box
- 108.9 × 108.9 × 21 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Corrected one-piece casting mold. Diameter including tabs 88.9 mm; thickness 16 mm; 12 curved swept spokes; 12 rounded tabs, angularly phased so tabs are centered in the spaces between the outer spoke tips; 19.5 mm center hub; same REX profile and other design dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Maximum outside diameter including all outer tabs | 88.9 mm | 50 – 120 |
| Cast wheel thickness / mold cavity depth | 16 mm | 6 – 20 |
| Circular center hub outside diameter | 19.5 mm | 12 – 30 |
| Number of internal curved spokes | 12 mm | 6 – 18 |
| Curved spoke width | 6.5 mm | 3 – 10 |
| Tangential spoke sweep from hub to rim | -20 deg | -35 – 35 |
| Outer ring radial width | 5 mm | 3 – 9 |
| Rounded outer tab count | 12 mm | 6 – 18 |
| Angular offset to center tabs in spaces between spoke tips | -5 mm | -10 – 5 |
| Rounded tab radial length | 7 mm | 4 – 12 |
| Rounded tab tangential width | 5.5 mm | 3 – 9 |
| Rounded tab corner radius | 1.3 mm | 0.5 – 2 |
| REX round envelope with casting clearance | 8.1 mm | 8 – 8.5 |
| REX hex across flats with casting clearance | 7.1 mm | 7 – 7.5 |
| Border around the wheel cavity | 10 mm | 6 – 20 |
| Solid floor under the cavity | 5 mm | 3 – 10 |
| Mold outside corner radius | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm