Everything else
Front Trencher Head Assembly
- Bounding box
- 933 × 630 × 720 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
生成大型工程机械前置车头总成,重型钢制底盘,自带整机液压动力系统、柴油动力舱、行走驱动结构。 车头最前端搭载重型链式开沟机系统: 1. 配置双排高强度开挖链条、挖斗齿、导向张紧轮、液压驱动马达; 2. 具备垂直升降调节机架,可调节开沟深度; 3. 整体为前置悬挂式工程机械结构,防护板齐全; 4. 底盘厚重稳重,承载后部整套焊接方舱设备重量; 5. 预留后部对接安装法兰、固定支架、液压油路接口。 功能:整车行走、整机动力输出、地面管沟连续开挖,结构工业风、实用、厚重、工程机械标准结构。
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis length | 700 mm | 400 – 1200 |
| Chassis width | 420 mm | 240 – 800 |
| Chassis frame height | 120 mm | 60 – 250 |
| Crawler track height | 160 mm | 80 – 300 |
| Crawler track width | 90 mm | 40 – 200 |
| Engine hood height | 230 mm | 100 – 400 |
| Operator cab height | 220 mm | 120 – 400 |
| Boom centre X | 440 mm | 300 – 600 |
| Boom / chain loop width | 120 mm | 80 – 200 |
| Chain plate thickness | 20 mm | 10 – 30 |
| Gap between chain rows | 70 mm | 40 – 160 |
| Boom top end height | 580 mm | 300 – 800 |
| Boom bottom end height | 80 mm | 40 – 200 |
| Teeth per straight chain run | 6 mm | 3 – 12 |
| Mast rail centre X | 330 mm | 200 – 520 |
| Mast height | 720 mm | 400 – 1000 |
| Rear docking flange thickness | 40 mm | 15 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
