Everything else
Front Bumper Brake Duct + Pipe
- Bounding box
- 100.0 × 75.0 × 141.9 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
just make me the front bumper brake duct +pipe model just that not a car
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Width | 100 mm | 60 – 220 |
| Flange Height | 75 mm | 50 – 200 |
| Flange Thickness | 6 mm | 2 – 20 |
| Bolt Hole Dia | 6 mm | 3 – 14 |
| Bolt Inset From Edge | 10 mm | 5 – 35 |
| Inlet Width | 70 mm | 20 – 180 |
| Inlet Height | 45 mm | 20 – 140 |
| Rect-to-Round Length | 45 mm | 10 – 180 |
| Duct Wall Thickness | 3 mm | 1 – 12 |
| Pipe Diameter | 50 mm | 15 – 140 |
| Pipe Length | 90 mm | 20 – 350 |
| Outlet Lateral Offset | 15 mm | -70 – 70 |
| Flange Corner Fillet | 2 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm