Frame Drone 5 inch X Cangkang Biru + Slot GPS

1 views

Bounding box: 201.4 × 185.5 × 41 mm
Engine: 3D Printing B-rep
Parameters: 46
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Frame drone 5 inch X gaya referensi: lengan karbon ujung garpu + cangkang biru dengan pola lubang, 8 baut, dan wadah GPS membulat di belakang atas

Parameters

Name	Value	Range
Panjang cangkang	164 mm	140 – 190
Lebar cangkang	38 mm	30 – 46
Radius sudut cangkang	8 mm	2 – 14
Panjang plat karbon	156 mm	130 – 180
Lebar plat karbon	32 mm	24 – 40
Radius sudut plat karbon	6 mm	2 – 12
Tebal karbon plat dan lengan	4 mm	2 – 6
Tinggi sisi bawah deck atas	28 mm	22 – 38
Tebal deck atas	4 mm	3 – 6
Pola lubang stack FC	30.5 mm	20 – 35
Diameter lubang baut	3.2 mm	2.2 – 4
Diameter tiang samping	6.4 mm	5 – 8
Posisi X tiang samping	44 mm	38 – 48
Posisi Y tiang samping	9 mm	5 – 14
Diameter kepala baut	5.5 mm	4 – 7
Panjang blok dinding samping	12 mm	8 – 18
Tebal blok dinding samping	7 mm	4 – 10
Tebal dinding ujung	8 mm	4 – 12
Lebar lengan di pangkal	12 mm	8 – 20
Lebar lengan di ujung	9 mm	6 – 16
Pangkal lengan X	15 mm	8 – 25
Pangkal lengan Y	14 mm	8 – 20
Posisi motor X	86 mm	70 – 95
Posisi motor Y	78 mm	60 – 90
Diameter pad motor	20 mm	14 – 24
Jarak lubang baut motor	12 mm	10 – 16
Diameter lubang baut motor	2.2 mm	1.6 – 3.2
Lubang tengah motor	7 mm	4 – 10
Diameter cuping garpu	9 mm	6 – 12
Lebar bukaan garpu V	6.5 mm	3 – 9
Posisi slot strap X	36 mm	25 – 42
Panjang slot strap	12 mm	8 – 20
Lebar slot strap	3.4 mm	2.5 – 5
Radius lubang hex	5.2 mm	3 – 7
Jarak lubang hex	17 mm	12 – 22
Lubang bulat di depan	10 mm	6 – 16
Posisi jendela TOF	60 mm	50 – 70
Lebar jendela TOF	7 mm	4 – 10
Panjang jendela TOF	17 mm	10 – 24
Sisi belakang (1 = +X, -1 = -X)	1 mm	-1 – 1
Panjang modul GPS	25 mm	18 – 32
Lebar modul GPS	25 mm	16 – 30
Kedalaman wadah GPS	9 mm	5 – 14
Tebal dinding wadah	1.8 mm	1.2 – 3
Toleransi modul	0.4 mm	0.1 – 1
Lebar celah kabel	8 mm	4 – 14

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS