Everything else
Frame Drone 5 inch X 1503 v11 NDL
- Bounding box
- 194.4 × 178.2 × 43.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch X 1503: cradle GPS NEO-6M 25x25 dan lubang bulat SMA di dinding belakang untuk nRF24L01 PA+LNA
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor sumbu X | 168.4 mm | 150 – 190 |
| Jarak motor sumbu Y | 152.2 mm | 130 – 170 |
| Panjang plat bawah | 150 mm | 130 – 170 |
| Lebar body | 38 mm | 32 – 46 |
| Tebal plat bawah dan arm | 5 mm | 3 – 6 |
| Lebar arm | 10.5 mm | 6 – 16 |
| Jari-jari lingkaran 3 lubang baut dari pusat motor | 5.2 mm | 4.5 – 6 |
| Diameter lubang baut M2 | 2.2 mm | 2 – 3 |
| Diameter lubang tengah motor | 6 mm | 4 – 8 |
| Ukuran modul GPS NEO-6M persegi | 25 mm | 18 – 30 |
| Kelonggaran tiap sisi | 0.3 mm | 0.1 – 0.8 |
| Tebal dinding cradle | 1.4 mm | 1 – 2.5 |
| Tinggi dinding cradle GPS | 9 mm | 4 – 14 |
| Diameter lubang bulat socket SMA antena | 6.6 mm | 5 – 9 |
| Tinggi lubang SMA dari dasar | 13.75 mm | 8 – 26 |
| Posisi lubang SMA sumbu Y | 0 mm | -10 – 10 |
| Tebal dinding ujung | 12 mm | 6 – 16 |
| Lebar jendela kanan depan | 20 mm | 10 – 28 |
| Tinggi dasar plat atas | 30 mm | 22 – 40 |
| Tebal plat atas | 4 mm | 2 – 6 |
| Panjang plat atas | 160 mm | 140 – 172 |
| Panjang slot lattice | 8 mm | 4 – 12 |
| Lebar slot lattice | 2.5 mm | 1.5 – 4 |
| Jarak antar slot lattice | 7 mm | 5 – 10 |
| Diameter kepala baut | 5.4 mm | 4 – 7 |
| Tinggi kepala baut | 1.8 mm | 1 – 3 |
| Tinggi huruf NDL | 9 mm | 3 – 10 |
| Tinggi timbul huruf | 1 mm | 0.6 – 2 |
| Posisi teks sumbu X, di depan cradle GPS | -44 mm | -50 – -40 |
| Posisi teks sumbu Y | 0 mm | -8 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm