Frame Drone 5 inch X 1503 FC 30.5 TOF + Slot GPS

1 views

Bounding box: 194.4 × 178.2 × 43 mm
Engine: 3D Printing B-rep
Parameters: 57
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Revisi: dudukan motor kembali bentuk X (4 cuping) seperti asli; pola lubang baut motor segitiga 3 lubang dengan 1 baut di depan (+X); GPS di belakang (-X)

Parameters

Name	Value	Range
Panjang deck atas	164 mm	140 – 190
Lebar deck atas	38 mm	30 – 46
Radius sudut deck	5 mm	2 – 12
Panjang plat bawah	150 mm	130 – 170
Radius sudut plat bawah	5 mm	2 – 12
Tebal plat bawah dan lengan	5 mm	3 – 8
Tinggi sisi bawah deck	30 mm	24 – 40
Tebal deck atas	4 mm	3 – 6
Chamfer tepi atas deck	1 mm	0 – 2
Pola lubang stack FC	30.5 mm	20 – 35
Diameter tiang	6.4 mm	5 – 8
Diameter lubang baut	3.2 mm	2.2 – 4
Posisi X tiang samping	52 mm	40 – 60
Posisi Y tiang samping	9 mm	5 – 14
Diameter counterbore kepala baut	6.4 mm	5 – 8
Kedalaman counterbore	1.8 mm	1 – 3
Diameter kepala baut	5.8 mm	4 – 7
Lebar lengan di pangkal	10.5 mm	6 – 16
Lebar lengan di ujung	10 mm	6 – 14
Pangkal lengan X	14.5 mm	8 – 25
Pangkal lengan Y	12 mm	6 – 18
Posisi motor X	84.2 mm	70 – 95
Posisi motor Y	76.1 mm	60 – 90
Tinggi rib ramping di pangkal lengan	6 mm	0 – 10
Diameter hub dudukan X	14 mm	10 – 18
Diameter cuping dudukan X	9.6 mm	6 – 12
Jarak cuping dari pusat	8.2 mm	6 – 10
Lubang tengah motor	6 mm	4 – 9
Lubang baut motor	2.4 mm	1.6 – 3.2
Radius pola baut segitiga	6 mm	4 – 7
Posisi slot strap X	36 mm	25 – 45
Panjang slot strap	20 mm	10 – 26
Lebar slot strap	3.4 mm	2.5 – 5
Radius lubang hex	5.5 mm	3 – 7
Jarak lubang hex	16 mm	12 – 22
Posisi slot oval X	62 mm	55 – 70
Panjang slot oval	10 mm	6 – 16
Lebar slot oval	3.4 mm	2.5 – 5
Posisi jendela TOF di belakang	60 mm	50 – 70
Lebar jendela TOF	6 mm	4 – 10
Panjang jendela TOF	12 mm	8 – 20
Posisi Y lubang TOF	8 mm	5 – 12
Panjang blok ujung	15 mm	10 – 22
Lebar jendela blok belakang	16 mm	8 – 24
Dasar jendela	9 mm	6 – 14
Atap jendela	18.5 mm	14 – 26
Lebar rongga U depan	21 mm	12 – 30
Tebal dinding U depan	3.5 mm	2 – 6
Dasar rongga U	7.5 mm	5 – 12
Atap rongga U	28.5 mm	22 – 29
Sisi GPS (-1 = belakang/-X, 1 = depan/+X)	-1 mm	-1 – 1
Panjang modul GPS	25 mm	18 – 30
Lebar modul GPS	25 mm	16 – 30
Kedalaman wadah GPS	9 mm	5 – 14
Tebal dinding wadah	1.6 mm	1.2 – 3
Toleransi modul	0.3 mm	0.1 – 1
Lebar celah kabel	8 mm	4 – 14

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS