Everything else
Frame Drone 5 inch X 1503 FC 30.5 TOF + Slot GPS
- Bounding box
- 194.4 × 178.2 × 43 mm
- Engine
- 3D Printing B-rep
- Parameters
- 57
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch X persis bentuk asli (plat, 8 tiang putih, deck biru dengan blok ujung depan berjendela dan ujung belakang U), clover motor 1503, plus detail baru dan slot GPS di atas belakang
Parameters
| Name | Value | Range |
|---|---|---|
| Panjang deck atas | 164 mm | 140 – 190 |
| Lebar deck atas | 38 mm | 30 – 46 |
| Radius sudut deck | 5 mm | 2 – 12 |
| Panjang plat bawah | 150 mm | 130 – 170 |
| Radius sudut plat bawah | 5 mm | 2 – 12 |
| Tebal plat bawah dan lengan | 5 mm | 3 – 8 |
| Tinggi sisi bawah deck | 30 mm | 24 – 40 |
| Tebal deck atas | 4 mm | 3 – 6 |
| Chamfer tepi atas deck | 1 mm | 0 – 2 |
| Pola lubang stack FC | 30.5 mm | 20 – 35 |
| Diameter tiang | 6.4 mm | 5 – 8 |
| Diameter lubang baut | 3.2 mm | 2.2 – 4 |
| Posisi X tiang samping | 52 mm | 40 – 60 |
| Posisi Y tiang samping | 9 mm | 5 – 14 |
| Diameter counterbore kepala baut | 6.4 mm | 5 – 8 |
| Kedalaman counterbore | 1.8 mm | 1 – 3 |
| Diameter kepala baut | 5.8 mm | 4 – 7 |
| Lebar lengan di pangkal | 10.5 mm | 6 – 16 |
| Lebar lengan di ujung | 10 mm | 6 – 14 |
| Pangkal lengan X | 14.5 mm | 8 – 25 |
| Pangkal lengan Y | 12 mm | 6 – 18 |
| Posisi motor X | 84.2 mm | 70 – 95 |
| Posisi motor Y | 76.1 mm | 60 – 90 |
| Tinggi rib ramping di pangkal lengan | 6 mm | 0 – 10 |
| Diameter hub motor | 14 mm | 10 – 18 |
| Diameter cuping clover | 9.6 mm | 6 – 12 |
| Jarak cuping dari pusat | 8.2 mm | 6 – 10 |
| Lubang tengah motor | 6 mm | 4 – 9 |
| Lubang baut motor | 2.4 mm | 1.6 – 3.2 |
| Radius lubang baut motor | 4.8 mm | 3.5 – 6 |
| Posisi slot strap X | 36 mm | 25 – 45 |
| Panjang slot strap | 20 mm | 10 – 26 |
| Lebar slot strap | 3.4 mm | 2.5 – 5 |
| Radius lubang hex | 5.5 mm | 3 – 7 |
| Jarak lubang hex | 16 mm | 12 – 22 |
| Posisi slot oval X | 62 mm | 55 – 70 |
| Panjang slot oval | 10 mm | 6 – 16 |
| Lebar slot oval | 3.4 mm | 2.5 – 5 |
| Posisi jendela TOF di depan | 60 mm | 50 – 70 |
| Lebar jendela TOF | 6 mm | 4 – 10 |
| Panjang jendela TOF | 12 mm | 8 – 20 |
| Posisi Y lubang TOF | 8 mm | 5 – 12 |
| Panjang blok ujung | 15 mm | 10 – 22 |
| Lebar jendela depan | 16 mm | 8 – 24 |
| Dasar jendela depan | 9 mm | 6 – 14 |
| Atap jendela depan | 18.5 mm | 14 – 26 |
| Lebar rongga U belakang | 21 mm | 12 – 30 |
| Tebal dinding U belakang | 3.5 mm | 2 – 6 |
| Dasar rongga U | 7.5 mm | 5 – 12 |
| Atap rongga U | 28.5 mm | 22 – 29 |
| Sisi belakang (1 = +X, -1 = -X) | 1 mm | -1 – 1 |
| Panjang modul GPS | 25 mm | 18 – 30 |
| Lebar modul GPS | 25 mm | 16 – 30 |
| Kedalaman wadah GPS | 9 mm | 5 – 14 |
| Tebal dinding wadah | 1.6 mm | 1.2 – 3 |
| Toleransi modul | 0.3 mm | 0.1 – 1 |
| Lebar celah kabel | 8 mm | 4 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm