Everything else
Frame Drone 5 inch X 1503 Detail
- Bounding box
- 188.4 × 172.2 × 43.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Buat lebih detail: frame drone 5 inch X, motor 1503, stack FC 30.5, slot TOF dan GPS
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor sumbu X | 168.4 mm | 150 – 190 |
| Jarak motor sumbu Y | 152.2 mm | 130 – 170 |
| Panjang body | 164 mm | 140 – 180 |
| Lebar body | 38 mm | 32 – 46 |
| Tebal arm | 5 mm | 3 – 6 |
| Lebar arm di pangkal | 16 mm | 10 – 22 |
| Jarak lubang stack FC | 30.5 mm | 20 – 36 |
| Tinggi standoff | 35 mm | 20 – 45 |
| Tebal plat atas | 3 mm | 2 – 5 |
| Diameter bell motor | 19.5 mm | 16 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm