Everything else
Four-Way Pyramid Apex Connector
- Bounding box
- 149.8 × 149.8 × 119.9 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a precision-engineered, detachable four-way apex connector for a modular Great Pyramid of Giza wireframe. GEOMETRY: The connector must join four inclined tubular rods meeting at a single geometrical apex. PYRAMID PARAMETERS: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Inclined rod centre-line length: approximately 1,793 mm. - Rod inclination: 51.84° relative to horizontal. - Adjacent inclined rod centre-line angle: approximately 63.4°. - Opposite inclined rod centre-line angle: approximately 96.0°. SOCKET CONFIGURATION: - Four receiving sockets. - Each socket compatible with the universal 30 mm rod connection system. - Precisely calculated three-dimensional socket orientations. - Four sockets symmetrically distributed around the vertical centreline. - All four rod centre-lines must intersect at the same theoretical apex point. - Incorporate keyed anti-rotation interfaces. - Positive mechanical locking compatible with the universal locking collar. CONSTRUCTION: - Reinforced central connector body. - Generous material around socket junctions. - Rounded transitions to minimise stress concentrations. - Detachable rod connections. - No permanent adhesive. - Designed for repeated assembly and disassembly. CRITICAL GEOMETRY: Calculate socket orientations using three-dimensional coordinate geometry, not approximate 90-degree socket placement. The connector must reproduce the exact intended square-pyramid geometry without introducing offsets between rod centre-lines. PRINTING: Maximum printable dimensions: 210 × 210 × 250 mm. Split into interlocking printable components if necessary, without compromising structural integrity. Generate watertight, manifold STL files for all components. Do not generate rods or the complete pyramid.
Parameters
| Name | Value | Range |
|---|---|---|
| Square base side | 1885 mm | 500 – 5000 |
| Pyramid height | 1200 mm | 200 – 5000 |
| Rod diameter | 30 mm | 10 – 80 |
| Socket bore diameter | 30.6 mm | 10.2 – 80.5 |
| Socket boss diameter | 50 mm | 20 – 150 |
| Socket boss length | 90 mm | 30 – 200 |
| Boss inner start from apex | 12 mm | 0 – 50 |
| Socket inner end from apex | 45 mm | 25 – 120 |
| Central hub radius | 33 mm | 20 – 120 |
| Anti-rotation key diameter | 5 mm | 2 – 15 |
| Anti-rotation key length | 38 mm | 8 – 100 |
| Edge fillet radius | 4 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
