Brackets and mounts
Four-Pillar Temple Cap
- Bounding box
- 45.0 × 45.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 58
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
11. Validation: Check 45 × 45 × 60 mm preliminary bounds, four-pillar count, symmetry, roof alignment, socket position, wall thickness, self-intersections and solid validity. Preserve the essential architecture if complex ornaments cannot be generated. 12. Deliverables: Export the actual solid as STEP (.step/.stp), plus the editable native CAD project, STL prototype and dimensioned drawing when supported. Include front, rear, side, top, bottom and isometric views. Identify assumptions and unresolved dimensions. Never rename STL as STEP or substitute a render for CAD. If direct export is unavailable, provide an executable CAD script and exact STEP export instructions. Priority: Deliver a valid, editable solid with four ornate pillars, connecting beams, a broad decorated base, a multi-tier Indian temple roof and a concealed mounting socket. Prioritise architectural accuracy, manufacturability and genuine STEP geometry over excessive ornamentation. Never claim an export succeeded unless the file exists.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 45 mm | 30 – 70 |
| Overall Height | 60 mm | 40 – 90 |
| Lower Plinth Height | 4 mm | 2 – 10 |
| Upper Plinth Height | 3 mm | 2 – 10 |
| Upper Plinth Width | 38 mm | 20 – 60 |
| Draft Angle | 2 deg | 0 – 6 |
| Shrine Cell Width | 24 mm | 12 – 40 |
| Shrine Cell Height | 20 mm | 10 – 35 |
| Arch Width | 8 mm | 3 – 18 |
| Arch Spring Height | 7 mm | 2 – 18 |
| Arch Depth | 2 mm | 0.5 – 6 |
| Body Groove Count | 2 | 0 – 5 |
| Body Groove Width | 1.5 mm | 0.3 – 3 |
| Body Groove Depth | 0.8 mm | 0.2 – 2 |
| Pillar Offset | 15 mm | 5 – 25 |
| Pillar Shaft Diameter | 4.5 mm | 2 – 9 |
| Pedestal Width | 8 mm | 4 – 14 |
| Pedestal Height | 3 mm | 1 – 7 |
| Capital Width | 9 mm | 4 – 16 |
| Capital Height | 3 mm | 1 – 7 |
| Pillar Flute Count | 8 | 0 – 20 |
| Pillar Flute Diameter | 1.2 mm | 0.3 – 3 |
| Pillar Ring Height | 1.2 mm | 0.3 – 3 |
| Pillar Ring Extra Diameter | 1.2 mm | 0.3 – 3 |
| Beam Width | 4 mm | 2 – 10 |
| Beam Height | 3 mm | 1 – 8 |
| Beam Relief Size | 1.2 mm | 0.3 – 3 |
| Beam Border Width | 1 mm | 0 – 2.5 |
| Beam Border Height | 1 mm | 0.3 – 2.5 |
| Beam Rosette Diameter | 2.5 mm | 1 – 6 |
| Cornice Height | 3 mm | 1.5 – 8 |
| Cornice Width | 36 mm | 15 – 60 |
| Cornice Chamfer | 0.8 mm | 0 – 2 |
| Roof Base Width | 34 mm | 15 – 55 |
| Roof Steps | 3 | 1 – 6 |
| Roof Step Height | 3.5 mm | 1 – 7 |
| Roof Step Inset | 4 mm | 0.5 – 10 |
| Eave Overhang | 1.5 mm | 0.2 – 4 |
| Roof Relief Count | 3 | 0 – 8 |
| Roof Relief Size | 1.5 mm | 0.3 – 3 |
| Neck Diameter | 6 mm | 2 – 14 |
| Neck Height | 4 mm | 1 – 10 |
| Finial Disc Diameter | 8 mm | 3 – 18 |
| Finial Disc Height | 2 mm | 0.5 – 5 |
| Finial Ball Diameter | 6 mm | 3 – 14 |
| Petal Count | 8 | 0 – 20 |
| Petal Size | 2.5 mm | 0.5 – 6 |
| Socket Diameter | 22 mm | 8 – 35 |
| Socket Depth | 20 mm | 5 – 40 |
| Socket Wall | 3 mm | 1 – 8 |
| Socket Clearance | 0.5 mm | 0 – 2 |
| Socket Mouth Depth | 2 mm | 0.2 – 6 |
| Base Pocket Wall | 2.5 mm | 1 – 6 |
| Base Pocket Depth | 5 mm | 0 – 15 |
| Bound Width | 45 mm | 30 – 100 |
| Bound Depth | 45 mm | 30 – 100 |
| Bound Height | 60 mm | 40 – 120 |
| Enforce Bounds (0/1) | 1 flag | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu