Everything else
Foundation Grid with Eccentric Footings and Transverse Beams
- Bounding box
- 19400.0 × 31400.0 × 3470.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the current model with the following complete and combined engineering parameters: 1. Footing Dimensions: Set Footing Length and Footing Width to 1500mm. Set Footing Thickness to 450mm. 2. Property Boundary (Colindancia): Configure all lateral/perimeter footings as eccentric (medianeras). The outer edges of these footings must align flush with the 19x31m property boundary line, pushing the footing volume strictly inside the lot. 3. Grid Connectivity: Connect all central footings to the lateral footings using transverse foundation beams, creating a completely closed structural grid. 4. Beam Dimensions & Position: Set Beam Width to 300mm and Beam Height to 400mm. Position all foundation beams directly on top of the footings, setting the beam bottom face flush with the footing top face (Z-axis offset = 450mm). 5. Excavation Depth Context: Set the total excavation depth (level of deployment) from the ground line to 1500mm, with the columns extending upwards through short piers (cuellos de columna). Re-build precision model and update the 3D render.
Parameters
| Name | Value | Range |
|---|---|---|
| Footing Length | 1500 mm | 800 – 3000 |
| Footing Width | 1500 mm | 800 – 3000 |
| Footing Thickness | 450 mm | 200 – 800 |
| Excavation Depth | 1500 mm | 500 – 3000 |
| Beam Width | 300 mm | 200 – 600 |
| Beam Height | 400 mm | 300 – 800 |
| Column Flange Width | 200 mm | 100 – 400 |
| Column Flange Thickness | 12 mm | 6 – 30 |
| Column Web Thickness | 8 mm | 4 – 20 |
| Column Section Height | 250 mm | 150 – 500 |
| Column Height (total) | 3000 mm | 2000 – 6000 |
| Anchor Plate Length | 400 mm | 200 – 600 |
| Anchor Plate Width | 400 mm | 200 – 600 |
| Anchor Plate Thickness | 20 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like