Everything else
Fort High School site plan (flat drawing plate)
- Bounding box
- 90.0 × 180.0 × 4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
no i need it in the same drawing i shared just edit on that image not a model
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate thickness | 1.6 mm | 1 – 6 |
| Main walkway width | 3.6 mm | 2 – 8 |
| Side walkway width | 2.6 mm | 1.5 – 6 |
| Walkway relief above base | 0.8 mm | 0.4 – 3 |
| School block relief height | 2.4 mm | 0.8 – 30 |
| Wing / hall relief height | 1.6 mm | 0.6 – 25 |
| School wall thickness | 3.4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm