Brackets and mounts
Formula 110 Ladder-Frame Chassis
- Bounding box
- 135.0 × 350.0 × 17.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create only ONE chassis for my Formula 110 car. Match the simple ladder-frame chassis from my previous design. Use two long, thin, parallel rectangular side rails with several rectangular cross members connecting them. Make the chassis approximately 350 mm long and 135 mm wide. Keep the center mostly open to reduce weight. The chassis should be thin, lightweight, symmetrical, and simple to manufacture. Include locations for a front axle at one end and a rear drive axle at the opposite end. The rear section must provide space for a rear-mounted mousetrap/torsion spring, transmission, and drive spool. Do not add wheels, axles, spring, transmission, prop shaft, or brake. Create only the chassis.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 350 mm | 300 – 400 |
| Chassis Width | 135 mm | 100 – 160 |
| Rail Thickness | 6 mm | 3 – 10 |
| Rail Height | 10 mm | 5 – 20 |
| Cross Member Width | 20 mm | 10 – 30 |
| Front Axle Hole Diameter | 5 mm | 3 – 8 |
| Rear Axle Hole Diameter | 8 mm | 5 – 12 |
| Rear Platform Length | 80 mm | 50 – 120 |
| Rear Platform Width | 60 mm | 40 – 100 |
| Rear Platform Thickness | 4 mm | 2 – 8 |
| Drive Slot Width | 10 mm | 5 – 20 |
| Drive Slot Length | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent