Everything else
Ford Lima 2.3 Turbo Dual Plenum ITB Manifold
- Bounding box
- 467 × 132 × 173 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Necesito hacer un dualplenum tipo lethamnn para un motor Ford lima 2.3 con turbo y 4 cuerpos individuales de 48 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Plenum length along engine | 400 mm | 200 – 520 |
| Plenum depth | 70 mm | 40 – 160 |
| Height of each chamber | 80 mm | 40 – 120 |
| Wall thickness | 4 mm | 2 – 8 |
| Vertical corner radius | 10 mm | 0 – 30 |
| Flange overhang each side | 12 mm | 6 – 30 |
| Flange thickness | 7 mm | 4 – 15 |
| Divider plate thickness | 6 mm | 3 – 12 |
| Slot width at inlet end | 30 mm | 6 – 60 |
| Slot width at far end | 14 mm | 6 – 60 |
| Gap from slot ends to chamber wall | 22 mm | 0 – 80 |
| Slot offset across depth | 12 mm | -18 – 18 |
| Runner centre spacing | 104 mm | 60 – 150 |
| Throttle body bore | 48 mm | 30 – 70 |
| Runner outside diameter | 58 mm | 40 – 90 |
| Runner length | 50 mm | 20 – 120 |
| Runner axis height | 30 mm | 15 – 60 |
| Runner flange diameter | 74 mm | 50 – 110 |
| Runner flange thickness | 8 mm | 4 – 16 |
| Runner flange bolt hole | 6.6 mm | 4 – 10 |
| Runner flange bolt half span | 29 mm | 15 – 34 |
| Inlet bore | 60 mm | 30 – 110 |
| Inlet tube wall | 4 mm | 2 – 12 |
| Inlet tube length | 55 mm | 20 – 120 |
| Flange bolt hole diameter | 6.6 mm | 3 – 12 |
| Bolt inset from flange edge | 6 mm | 3 – 20 |
| Bolt spacing along length | 67 mm | 30 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm