Brackets and mounts
Force Plate Components
- Bounding box
- 11370.0 × 400.0 × 61.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- August 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design a low-profile physiotherapy static force plate, 600 × 400 mm. Create a rigid 10 mm thick rounded aluminum top plate supported by 4 × 50 kg bar load cells, one near each corner. Load cells must sit between the top plate and a rigid lower frame; they must be the only load path between the two plates. Add a 560 × 360 mm lower frame with 4 adjustable rubber feet (Ø40 mm, M6). Include mounting brackets for the load cells, an internal electronics compartment (~200 × 120 × 35 mm), and cable routing to the electronics. Overall height: 50–60 mm. Make all dimensions in mm and keep load-cell mounting holes parametric so they can be adjusted to the exact load-cell model later. Create separate editable components: top plate, lower frame, load-cell mounts, and feet. Design it as a functional force plate, not a bathroom scale.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap | 650 mm | 450 – 1200 |
| Top plate length | 600 mm | 300 – 1000 |
| Top plate width | 400 mm | 200 – 800 |
| Top plate thickness | 10 mm | 4 – 20 |
| Top plate corner radius | 4 mm | 0 – 8 |
| Top plate countersink diameter | 13 mm | 6 – 20 |
| Top plate countersink angle | 90 deg | 60 – 120 |
| Lower frame length | 560 mm | 300 – 1000 |
| Lower frame width | 360 mm | 200 – 800 |
| Lower frame base thickness | 12 mm | 4 – 30 |
| Lower frame load hole diameter | 6.5 mm | 3 – 12 |
| Lower frame foot hole diameter | 6.5 mm | 3 – 12 |
| Foot corner inset | 15 mm | 5 – 60 |
| Cable pocket width | 18 mm | 4 – 40 |
| Cable pocket depth | 4 mm | 1 – 10 |
| Electronics pocket length | 200 mm | 100 – 400 |
| Electronics pocket width | 120 mm | 60 – 250 |
| Electronics pocket depth | 35 mm | 10 – 80 |
| Electronics wall thickness | 5 mm | 2 – 12 |
| Load cell length | 100 mm | 40 – 200 |
| Load cell width | 25 mm | 10 – 60 |
| Load cell height | 25 mm | 10 – 60 |
| Load cell hole spacing | 80 mm | 20 – 180 |
| Load cell hole diameter | 6.5 mm | 3 – 12 |
| Load cell corner inset X | 70 mm | 30 – 150 |
| Load cell corner inset Y | 60 mm | 30 – 150 |
| Load cell bracket length | 100 mm | 50 – 160 |
| Load cell bracket width | 40 mm | 20 – 80 |
| Load cell bracket thickness | 8 mm | 4 – 20 |
| Load cell bracket hole diameter | 6.5 mm | 3 – 12 |
| Rubber foot diameter | 40 mm | 20 – 80 |
| Rubber foot height | 10 mm | 4 – 30 |
| Rubber foot stud diameter | 6 mm | 3 – 12 |
| Rubber foot stud length | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent