Gears and transmission
Footstep Power Generator with Rack and Pinion
- Bounding box
- 220.0 × 140.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create me a footstep power generation with one optimized gear at the center that has an efficient shaft arrangement in the middle part and has 4 retreat springs on each side: has a metallic rack and footstep-optimized generators for maximum power generation per footstep.
Parameters
| Name | Value | Range |
|---|---|---|
| Gear Module | 2 mm | 1 – 6 |
| Gear Teeth | 20 | 10 – 60 |
| Gear Face Width | 12 mm | 4 – 40 |
| Centre Shaft Diameter | 10 mm | 6 – 30 |
| Base Length | 220 mm | 120 – 400 |
| Base Width | 140 mm | 80 – 300 |
| Base Thickness | 10 mm | 4 – 30 |
| Bearing Wall Length | 100 mm | 40 – 200 |
| Bearing Wall Height | 60 mm | 30 – 160 |
| Bearing Wall Thickness | 10 mm | 5 – 30 |
| Bearing Wall Offset | 40 mm | 20 – 120 |
| Rack Thickness | 12 mm | 6 – 40 |
| Rack Width | 20 mm | 8 – 60 |
| Return Spring Outer Dia | 24 mm | 10 – 60 |
| Return Spring Free Length | 100 mm | 30 – 250 |
| Footstep Plate Length | 200 mm | 100 – 400 |
| Footstep Plate Width | 120 mm | 60 – 300 |
| Footstep Plate Thickness | 10 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled