Gears and transmission
Footstep Power Generator
- Bounding box
- 220.0 × 170.0 × 142.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create me a footstep power generation with one pair of gears at the center and four string
Parameters
| Name | Value | Range |
|---|---|---|
| Gear Module | 2 mm | 1 – 5 |
| Driver Gear Teeth | 30 teeth | 14 – 60 |
| Pinion Teeth | 15 teeth | 10 – 40 |
| Gear Face Width | 12 mm | 6 – 30 |
| Shaft Diameter | 14 mm | 6 – 30 |
| Shaft Axis Height | 70 mm | 30 – 120 |
| Rope Drum Diameter | 50 mm | 20 – 100 |
| Rope Drum Length | 48 mm | 20 – 110 |
| Base Plate Length | 220 mm | 140 – 340 |
| Base Plate Width | 170 mm | 120 – 280 |
| Base Plate Thickness | 10 mm | 4 – 30 |
| Bearing Wall Length | 160 mm | 90 – 260 |
| Bearing Wall Height | 100 mm | 50 – 140 |
| Wall Inset From Centre | 70 mm | 35 – 110 |
| Bearing Wall Thickness | 10 mm | 4 – 30 |
| String Diameter | 4 mm | 1.5 – 12 |
| Step Plate Length | 210 mm | 140 – 340 |
| Step Plate Width | 165 mm | 110 – 280 |
| Step Plate Thickness | 12 mm | 5 – 40 |
| Step Plate Height | 130 mm | 60 – 240 |
| Guide Post Diameter | 14 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled