Brackets and mounts
Folding PC Technician Toolbox
- Bounding box
- 210.0 × 240.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
Design a fully functional parametric 3D-printable folding PC technician toolbox. Maximum folded size: 150 × 150 × 150 mm. Target: about 145 × 145 × 120 mm. The toolbox must open into multiple connected folding sections and close into a compact portable box with an integrated carrying handle. Add a secure latch and, if possible, a groove for a thin gasket to make it dust/water resistant. Storage required: * 5 small sliding screw drawers, each divided into several compartments: 1. MOTHERBOARD 2. CASE 3. CPU COOLER / WATER COOLING 4. POWER SUPPLY 5. OTHER * 4 protected RAM slots for standard desktop DIMMs. * 2 CPU compartments: INTEL and AMD. * 2 NVMe M.2 2280 SSD slots. * 2 SATA SSD slots. * 2–3 screwdriver holders. * 10–20 screwdriver bit holders. * 1 thermal paste holder. Every item must be securely retained with clips, snap-fits or recessed pockets so nothing moves during transport. Drawers must slide smoothly with 0.2–0.3 mm clearance and have stops so they cannot fall out. Folding hinges must work correctly with about 0.3–0.5 mm clearance. No unnecessary gaps between folded sections. Add clear engraved/embossed labels: MOTHERBOARD, CASE, COOLER, PSU, OTHER, RAM, INTEL, AMD, NVMe, SATA SSD, SCREWDRIVERS, BITS, THERMAL PASTE. Design for FDM printing with PETG, 0.4 mm nozzle and 0.2 mm layer height. Avoid supports whenever possible. Make the design durable, compact, ergonomic and actually manufacturable. All dimensions must be parametric and editable. Verify that all parts can physically open, close, slide and fit together before finalizing the model.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 140 mm | 100 – 150 |
| Base Depth | 100 mm | 80 – 150 |
| Base Height | 30 mm | 20 – 40 |
| Base Wall Thickness | 3 mm | 2 – 6 |
| Hinge Pin Diameter | 4 mm | 2 – 6 |
| Handle Bridge Length | 140 mm | 100 – 150 |
| Bridge Width (depth) | 15 mm | 10 – 25 |
| Bridge Height | 20 mm | 10 – 30 |
| Panel Length (along hinge) | 140 mm | 100 – 150 |
| Panel Thickness | 12 mm | 6 – 15 |
| Panel Height (vertical) | 50 mm | 30 – 80 |
| Number of RAM Slots | 4 | 1 – 8 |
| RAM Slot Width | 9 mm | 5 – 12 |
| CPU Pocket Diameter | 40 mm | 30 – 50 |
| NVMe Slot Length | 80 mm | 60 – 100 |
| SATA SSD Slot Length | 100 mm | 70 – 110 |
| SATA SSD Slot Width | 25 mm | 20 – 28 |
| Screwdriver Holder Diameter | 10 mm | 6 – 15 |
| Bit Holder Count | 16 mm | 10 – 20 |
| Bit Holder Hole Diameter | 6 mm | 4 – 8 |
| Thermal Paste Pocket Diameter | 20 mm | 15 – 25 |
| Drawer Bank Width | 100 mm | 80 – 140 |
| Drawer Bank Depth | 40 mm | 30 – 50 |
| Drawer Bank Height | 35 mm | 25 – 50 |
| Drawer Sliding Clearance | 0.25 mm | 0.1 – 0.5 |
| Drawer 1 Internal Height (MOTHERBOARD) | 5 mm | 4 – 10 |
| Drawer 2 Internal Height (CASE) | 5 mm | 4 – 10 |
| Drawer 3 Internal Height (COOLER) | 8 mm | 5 – 15 |
| Drawer 4 Internal Height (PSU) | 8 mm | 5 – 15 |
| Drawer 5 Internal Height (OTHER) | 5 mm | 4 – 10 |
| Drawer Internal Width | 88 mm | 60 – 95 |
| Drawer Internal Depth | 30 mm | 20 – 38 |
| Lid Thickness | 10 mm | 6 – 15 |
| Gasket Cross-section Width | 3 mm | 2 – 4 |
| Gasket Cross-section Height | 2 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent