Everything else
Foldable Finnish Moped License Plate Holder
- Bounding box
- 130 × 65 × 115 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Tee minulle mopoon taitettava kilventeline joka lukituu tukevasti piiloitetussa asennossa ja näkyvässä asennossa. Se pitäisi kiinnittyä mopoon ja kilpeen tukevasti. Kilven malli on suomen mopon kilpi
Parameters
| Name | Value | Range |
|---|---|---|
| Finnish moped plate width | 118 mm | 80 – 160 |
| Finnish moped plate height | 82 mm | 60 – 120 |
| Plate corner radius | 5 mm | 2 – 10 |
| Plate thickness | 2 mm | 1 – 4 |
| Plate bottom above hinge | 16 mm | 8 – 40 |
| Frame border width | 5 mm | 3 – 10 |
| Frame depth | 8 mm | 4 – 12 |
| Frame back thickness | 4 mm | 2 – 8 |
| Retaining lip width | 4 mm | 2 – 8 |
| Retaining lip thickness | 1.5 mm | 0.8 – 3 |
| Sliding fit clearance | 0.25 mm | 0.1 – 0.5 |
| Hinge barrel length | 40 mm | 20 – 70 |
| Hinge barrel diameter | 12 mm | 8 – 20 |
| Hinge pin diameter | 7.8 mm | 5 – 12 |
| Lock pin diameter | 5 mm | 3 – 8 |
| Lock radius from hinge | 34 mm | 20 – 60 |
| Lock ear width | 8 mm | 4 – 16 |
| Lock ear depth | 12 mm | 6 – 20 |
| Cheek thickness | 6 mm | 4 – 10 |
| Side clearance | 0.4 mm | 0.2 – 1 |
| Cheek length | 60 mm | 40 – 90 |
| Cheek height | 54 mm | 30 – 90 |
| Cheek Y offset | -10 mm | -30 – 10 |
| Hinge height | 12 mm | 6 – 30 |
| Pin head diameter | 12 mm | 6 – 20 |
| Pin head thickness | 2.5 mm | 1 – 5 |
| Mounting plate width | 130 mm | 80 – 180 |
| Mounting plate depth | 50 mm | 30 – 80 |
| Mounting plate thickness | 6 mm | 4 – 12 |
| Mounting bolt hole diameter | 6.6 mm | 4 – 10 |
| Bolt hole spacing | 100 mm | 40 – 160 |
| Bolt hole Y offset | 0 mm | -15 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm