Brackets and mounts
Flying Wing WIG Craft
- Bounding box
- 313.0 × 274.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
A flying wing ground effect vehicle (WIG craft), trapezoidal shape, front edge 30cm wide, rear edge 15cm wide, chord length 18cm. Flat bottom with Clark Y airfoil profile. Swept leading edge (~20°), straight trailing edge. Four small electric motors mounted on top in the center section (not at wingtips), with aerodynamic cylindrical pylons (18mm tall, 20mm diameter) featuring smooth fillet bases and 38mm protective rings. Front motors horizontal, rear motors tilted 3-5° downward. Vertical endplate floats along both side edges (18cm long, 3cm wide, 5cm tall, tapering from 35mm to 20mm toward rear). Flat rectangular hatch on top center (40x30mm). No fuselage, no tail, no vertical stabilizers. Pure flying wing design. Dark matte gunmetal gray color with silver bat logo on the hatch.
Parameters
| Name | Value | Range |
|---|---|---|
| Leading Edge Span | 300 mm | 100 – 500 |
| Trailing Edge Span | 150 mm | 50 – 400 |
| Chord (root) | 180 mm | 50 – 300 |
| Wing Thickness | 20 mm | 10 – 40 |
| Endplate Length | 180 mm | 50 – 300 |
| Endplate Width | 30 mm | 10 – 80 |
| Endplate Height | 50 mm | 20 – 100 |
| Motor Pylon Height | 18 mm | 10 – 50 |
| Motor Pylon Diameter | 20 mm | 10 – 40 |
| Motor Ring Diameter | 38 mm | 20 – 60 |
| Motor Ring Thickness | 5 mm | 2 – 10 |
| Hatch Length | 40 mm | 20 – 100 |
| Hatch Width | 30 mm | 20 – 80 |
| Hatch Thickness | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent