Everything else
Flip-Top Bottle Cap
- Bounding box
- 29.0 × 28.0 × 37.2 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
我想要類似瓶蓋形狀然後上面是可以上掀蓋 打開中間引一個小孔 跟市售瓶蓋尺寸一模一樣就好
Parameters
| Name | Value | Range |
|---|---|---|
| Cap Outer Diameter | 28 mm | 20 – 40 |
| Cap Inner Diameter | 25.4 mm | 16 – 38 |
| Cap Height | 17 mm | 8 – 30 |
| Top Wall Thickness | 1.5 mm | 0.8 – 4 |
| Spout Hole Diameter | 5 mm | 1.5 – 12 |
| Flip Lid Diameter | 26 mm | 10 – 40 |
| Flip Lid Thickness | 2.5 mm | 1 – 6 |
| Lid Open Angle | 45 deg | 0 – 120 |
| Hinge Pin Diameter | 4 mm | 1.5 – 6 |
| Hinge Pin Length | 6 mm | 2 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm