Loading the interactive model…
Interactive 3D model of Flat Disc with Three Ratchet TeethGears and transmission
Flat Disc with Three Ratchet Teeth
33 views
- Bounding box
- 28.0 × 26.8 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat cylindrical disc that is 25mm in diameter and 5mm thick. Cut a perfectly centered 5.4mm circular hole through the middle of the disc. Along the outside edge of the disc, extrude 3 sharp, evenly spaced triangle teeth pointing outward like a ratchet gear.
Parameters
| Name | Value | Range |
|---|---|---|
| Disc Diameter | 25 mm | 10 – 100 |
| Thickness | 5 mm | 1 – 20 |
| Center Hole Diameter | 5.4 mm | 1 – 20 |
| Number of Teeth | 3 | 1 – 12 |
| Tooth Base Width | 3 mm | 0.5 – 10 |
| Tooth Height (Outward) | 3 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS