Everything else
Flanged Shaft (GD&T Datum-Ready, Centre-Drilled)
- Bounding box
- 258.3 × 90.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- October 18, 2026
Download
Free to download and use. See the terms.
The prompt
apply all 14 legacy GD&T symbols to this SAME part: straightness, flatness, circularity, cylindricity, parallelism, perpendicularity, angularity, position, concentricity, symmetry, line profile, surface profile, circular runout and total runout 2d cad pdf oluştur
Parameters
| Name | Value | Range |
|---|---|---|
| Journal A Diameter | 30 mm | 10 – 60 |
| Journal A Length | 60 mm | 10 – 150 |
| Collar Diameter | 42 mm | 15 – 90 |
| Collar Length | 8 mm | 2 – 30 |
| Journal B Diameter | 35 mm | 10 – 70 |
| Journal B Length | 45 mm | 10 – 150 |
| Flat Section Diameter | 40 mm | 12 – 90 |
| Flat Section Length | 40 mm | 5 – 150 |
| Milled Flat Depth | 3 mm | 0.5 – 12 |
| Taper Length | 20 mm | 3 – 80 |
| Journal C Diameter | 28 mm | 8 – 60 |
| Journal C Length | 40 mm | 5 – 150 |
| Curved Nose Length | 25 mm | 5 – 100 |
| Nose End Diameter | 20 mm | 4 – 50 |
| Flange Diameter | 90 mm | 40 – 200 |
| Flange Thickness | 12 mm | 4 – 40 |
| Bolt Circle Diameter | 70 mm | 20 – 160 |
| Bolt Hole Diameter | 9 mm | 2 – 20 |
| Bolt Hole Count | 6 pcs | 3 – 12 |
| Keyway Length | 40 mm | 5 – 120 |
| Keyway Width | 8 mm | 2 – 20 |
| Keyway Depth | 5 mm | 0.5 – 12 |
| Radial Cross Hole Dia | 10 mm | 2 – 30 |
| Centre Hole Drill Dia | 3.15 mm | 1 – 10 |
| Centre Hole Countersink Dia | 6.3 mm | 2 – 16 |
| Centre Hole Drill Depth | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm