Brackets and mounts
Flange Bearing Housing Block
- Bounding box
- 100.0 × 100.0 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a mechanical flange bearing housing block. It features a flat square base plate measuring 100mm by 100mm with a thickness of 12mm. In the exact center of this plate, there is a protruding cylindrical collar with an outer diameter of 65mm and a height of 30mm. A main cylindrical through-hole of 40mm diameter runs through the center of the cylinder and the base. Finally, the square base has four standard mounting through-holes of 10mm diameter, each located near the corners, spaced exactly 75mm apart from each other.
Parameters
| Name | Value | Range |
|---|---|---|
| Base side | 100 mm | 60 – 180 |
| Base thickness | 12 mm | 6 – 25 |
| Collar outer diameter | 65 mm | 45 – 110 |
| Collar height | 30 mm | 15 – 60 |
| Main bore diameter | 40 mm | 20 – 55 |
| Mounting hole diameter | 10 mm | 4 – 20 |
| Mounting hole center spacing | 75 mm | 45 – 95 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent