Brackets and mounts
FKRC EV Go-Kart Chassis Assembly
- Bounding box
- 1944.8 × 2000.0 × 2000.6 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
Design a manufacturable single-seat FKRC EV go-kart tubular space-frame chassis. Use 60V 6kW rear-wheel-drive motor and actual 60V 60Ah battery, size 500x240x350mm (LxWxH). Place battery behind driver, low and centered, inside a rigid protected enclosure. Chassis: seamless steel circular tubes, primary 25.4x2mm, secondary 19.05x1.5mm. Target wheelbase 1250mm, front track 900mm, rear track 1000mm, ground clearance 45mm. Front tyres 10x4.5-5, rear 11x7.1-5. Create triangulated space frame with front bulkhead, side/rear impact protection, continuous main roll hoop with braces, driver cockpit, seat, mechanical steering, pedals, rear axle, motor mount, battery enclosure, firewall and floor. Optimize for low CG, torsional stiffness, low weight and easy tube welding. Include tyre, driver, battery and motor clearance. Make all major dimensions parametric and generate a complete editable 3D assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Wheelbase | 1250 mm | 1000 – 1500 |
| Front Track | 900 mm | 800 – 1000 |
| Rear Track | 1000 mm | 900 – 1100 |
| Ground Clearance | 45 mm | 30 – 60 |
| Primary Tube Diameter | 25.4 mm | 20 – 30 |
| Primary Tube Thickness | 2 mm | 1 – 3 |
| Secondary Tube Diameter | 19.05 mm | 15 – 25 |
| Secondary Tube Thickness | 1.5 mm | 1 – 2 |
| Battery Length | 500 mm | 400 – 600 |
| Battery Width | 240 mm | 200 – 300 |
| Battery Height | 350 mm | 300 – 400 |
| Motor Power (kW) | 6 kW | 4 – 10 |
| Front Tyre Diameter | 254 mm | 200 – 300 |
| Front Tyre Width | 114 mm | 80 – 150 |
| Rear Tyre Diameter | 279 mm | 250 – 320 |
| Rear Tyre Width | 180 mm | 150 – 220 |
| Seat Width | 400 mm | 350 – 450 |
| Steering Wheel Diameter | 300 mm | 250 – 350 |
| Pedal Length | 150 mm | 100 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent