Brackets and mounts
Fixed-offset automotive camber plate
- Bounding box
- 92.8 × 80.3 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a solid mechanical engineering CAD part exported as a STEP file (AP214 format) for a fixed-offset automotive camber plate (rear suspension top mount) with a total plate thickness of 10.0mm. Use 6061-T6 aluminum material constraints. Apply a Cartesian coordinate system setting the origin (X: 0.00, Y: 0.00) at the absolute geometric center of a 3-hole equilateral triangle mounting pattern. Features and precise dimensions: 1. Chassis Mounting Base: Main body profile is an equilateral triangle bounded by an outer Pitch Circle Diameter (PCD) of 112.00mm. Center-to-center spacing between all three mounting holes is exactly 97.00mm. 2. Mounting Holes: Create three thru-holes with a diameter of 8.50mm positioned symmetrically on the 112.00mm PCD. The hole coordinates are exactly located at (0.00, 56.00), (-48.50, -28.00), and (48.50, -28.00). 3. Offset Axis: Shift the main bearing bore center axis exactly 15.00mm away from the geometric center along the negative X-axis to coordinates (X: -15.00, Y: 0.00). 4. Bearing Bore (Step 1): From the bottom face of the plate (Z: 10.00mm) extending up to Z: 1.50mm, machine a high-precision blind bore with an absolute diameter of 29.965mm to serve as an interference press-fit for a 30.00mm OD spherical bearing. 5. Compression Shoulder (Step 2): From Z: 1.50mm up to the top face (Z: 0.00mm), step the hole down to an inner diameter of 26.00mm, creating a solid 1.50mm thick mechanical shoulder to block upward bearing movement. 6. Retaining Snap Ring Groove: Inside the 29.965mm bore wall, machine a concentric internal snap ring recess channel matching DIN 472 specifications. The groove must have a diameter of 31.40mm and a width of 1.30mm. Locate the groove precisely between Z: 7.20mm and Z: 8.50mm, leaving a minimum solid material wall margin of 1.50mm at the bottom of the plate to prevent shearing under rebound load. Ensure all features are perfectly aligned coaxially on the offset center axis (X: -15.00, Y: 0.00) and that all faces are planar and perpendicular. Output as a clean solid model.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate thickness | 10 mm | 5 – 20 |
| Mounting hole center spacing | 97 mm | 80 – 120 |
| Mounting hole diameter | 8.5 mm | 5 – 12 |
| Bearing bore axis offset X | -15 mm | -30 – 0 |
| Bearing bore axis offset Y | 0 mm | -10 – 10 |
| Bearing bore diameter | 29.97 mm | 28 – 32 |
| Compression shoulder diameter | 26 mm | 22 – 28 |
| Compression shoulder thickness | 1.5 mm | 0.5 – 5 |
| Snap ring groove diameter | 31.4 mm | 30 – 33 |
| Snap ring groove width | 1.3 mm | 0.5 – 3 |
| Bottom wall margin below groove | 1.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu