Brackets and mounts
Fixed Base Plate with Angled Dispensing Chute
- Bounding box
- 200.0 × 200.0 × 78.5 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a fixed base plate with an integrated angled dispensing chute. Start with a flat square base plate of 200mm x 200mm with a thickness of 5mm. Add a central 5.5mm diameter through-hole for a stepper motor shaft pass-through. Near the outer edge, aligned with the carousel slot radius (75mm from center), cut a single circular outlet hole with a diameter of 25mm. Extrude a hollow cylindrical chute tube (inner diameter 25mm, outer diameter 31mm) extending downward from the bottom of the outlet hole at a 45-degree angle for a distance of 80mm. On the side wall of the angled chute, create a thin rectangular slot cutout (22mm wide by 3mm high) halfway down its length to insert a sliding gate plate. Add two 3mm mounting holes lower down the chute for an infrared sensor module."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 200 mm | 100 – 300 |
| Base Width | 200 mm | 100 – 300 |
| Base Thickness | 5 mm | 2 – 15 |
| Central Hole Diameter | 5.5 mm | 3 – 20 |
| Outlet Radial Distance | 75 mm | 20 – 150 |
| Outlet Hole Diameter | 25 mm | 10 – 50 |
| Chute Inner Diameter | 25 mm | 10 – 50 |
| Chute Outer Diameter | 31 mm | 12 – 60 |
| Chute Length (along axis) | 80 mm | 30 – 150 |
| Chute Angle (from vertical) | 45 deg | 20 – 70 |
| Slot Width | 22 mm | 10 – 40 |
| Slot Height | 3 mm | 1 – 10 |
| Slot Position (0=start,1=end) | 0.5 | 0.2 – 0.8 |
| Mounting Hole Diameter | 3 mm | 2 – 6 |
| Mount Hole Axial Offset from end | 15 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent