Brackets and mounts
Fire Extinguisher Wall Bracket with Bucket
- Bounding box
- 141.9 × 164.2 × 300 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Add a mount for the fire extinguisher. The fire extinguisher must be quick-release.
Parameters
| Name | Value | Range |
|---|---|---|
| Extinguisher body diameter | 130 mm | 80 – 250 |
| Wall thickness | 4 mm | 2 – 8 |
| Backplate width | 80 mm | 40 – 200 |
| Backplate height | 300 mm | 200 – 600 |
| Bottom bucket height | 60 mm | 30 – 150 |
| Front opening angle | 120 deg | 60 – 180 |
| Clearance around extinguisher | 2 mm | 1 – 5 |
| Upper clamp band height | 40 mm | 20 – 100 |
| Upper clamp height from bottom | 220 mm | 100 – 500 |
| Mounting screw hole diameter | 5.5 mm | 3 – 8 |
| Mounting hole vertical spacing | 240 mm | 100 – 500 |
| Lower screw hole from bottom | 20 mm | 10 – 100 |
| Bucket floor thickness | 5 mm | 2 – 10 |
| Strap extension onto top band | 5 deg | 0 – 15 |
| Radial overlap onto top band | 0.8 mm | 0.2 – 2 |
| Strap thickness | 3 mm | 1.5 – 6 |
| Pull tab length | 20 mm | 5 – 50 |
| Pull tab width | 30 mm | 10 – 60 |
| Pull tab thickness | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu