Brackets and mounts
Fingerprint Sensor Housing - Front Face Corrected
- Bounding box
- 45.0 × 70.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Modify only the front face of the current model. Keep the hollow housing and rear cylindrical mounting neck exactly unchanged. Fingerprint sensor opening: - Create one completely empty rectangular through-hole measuring 23 mm wide by 28 mm high. - Use a rectangular cutting prism to remove all material inside this rectangle through the entire front wall. - The final rectangular opening must be one continuous empty void. - Remove the center panel, the two side slots and every circular hole currently inside the rectangular opening. - There must be no material and no circular feature inside the sensor opening. LED opening: - Remove the circular hole currently located to the right of the sensor opening. - Create one 3 mm diameter circular through-hole. - Position it horizontally centered with the rectangular sensor opening. - Position its center 8 mm above the upper edge of the rectangular opening. Cable passage: - The 8 mm cable passage must begin at the rear end of the cylindrical mounting neck and end inside the hollow cavity. - It must not continue through the front wall. - No 8 mm circular hole should be visible from the front. Do not change any other dimensions or features.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Width | 45 mm | 20 – 120 |
| Housing Height | 70 mm | 20 – 160 |
| Housing Depth | 18 mm | 8 – 60 |
| Wall Thickness | 2.5 mm | 1 – 8 |
| Corner Radius | 4 mm | 0.5 – 15 |
| Sensor Opening Width | 23 mm | 5 – 60 |
| Sensor Opening Height | 28 mm | 5 – 80 |
| LED Hole Diameter | 3 mm | 1 – 10 |
| LED Centre Above Sensor Top Edge | 8 mm | 2 – 30 |
| Neck Outside Diameter | 19 mm | 8 – 60 |
| Neck Length | 12 mm | 2 – 60 |
| Neck Wall Thickness | 5.5 mm | 1 – 15 |
| Cable Passage Diameter | 8 mm | 1 – 20 |
| Rear Bridge Height | 26 mm | 6 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu