Filament spooler assembled

1 views

Bounding box: 220 × 205.5 × 157 mm
Engine: 3D Printing B-rep
Parameters: 45
Published: October 28, 2026

Download

Free to download and use. See the terms.

The prompt

its going to use empty spools could you make it able to hold any type of spool and put it together so i can see it.

Parameters

Name	Value	Range
Base length	220 mm	180 – 300
Base width	140 mm	100 – 200
Base plate thickness	8 mm	6 – 12
Upright height above plate	80 mm	60 – 120
Upright wall thickness	12 mm	8 – 20
Upright depth front-to-back	50 mm	30 – 80
Distance between upright centers	120 mm	80 – 180
Axle center height from bed	75 mm	65 – 90
Bearing pocket diameter	22.4 mm	22.2 – 23
Structural rib thickness	6 mm	4 – 10
Clamping flange diameter	100 mm	80 – 160
Flange thickness	6 mm	4 – 10
Hub diameter to fit spool hole	52 mm	40 – 90
Distance between flanges = spool width + clearance	70 mm	50 – 120
Axle bore diameter	8.3 mm	8.1 – 9
Filament access hole diameter	4 mm	3 – 6
Shaft diameter	8 mm	8 – 12
Shaft length	170 mm	140 – 220
Set-screw flat width	6 mm	5 – 8
Set-screw flat depth	1.5 mm	1 – 3
Coupler diameter	20 mm	15 – 30
Coupler length	25 mm	20 – 40
Motor shaft diameter	5 mm	5 – 8
Pinion gear outside diameter	30 mm	24 – 40
Pinion gear tooth count	20 mm	12 – 30
Pinion gear thickness	8 mm	6 – 12
Pinion bore diameter	8.3 mm	8.1 – 9
Cam gear outside diameter	60 mm	50 – 80
Cam gear tooth count	60 mm	40 – 80
Cam gear thickness	8 mm	6 – 12
Cam gear bore diameter	8.3 mm	8.1 – 9
Eccentric pin offset from center	8 mm	5 – 15
Eccentric pin diameter	3 mm	2.5 – 5
Eccentric pin height	10 mm	8 – 15
Carriage length along rail	35 mm	25 – 50
Carriage width front-to-back	25 mm	20 – 40
Carriage height	18 mm	12 – 25
Rail bore diameter	8.3 mm	8.1 – 9
Filament guide eye diameter	3 mm	2 – 5
Link pin diameter	3 mm	2.5 – 5
Link pin height above carriage	8 mm	5 – 12
Link overall length	45 mm	35 – 60
Link width	10 mm	6 – 15
Link thickness	6 mm	4 – 10
Link pin hole diameter	3.3 mm	3.1 – 4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS