Figure 4 - Support Bracket (Fork and Rib Geometry Corrected)

3 views

Bounding box: 122.0 × 50.0 × 80.0 mm
Engine: Precision B-rep
Parameters: 14
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

Rebuilt from the supplied Figure 4 drawing. Continuous Ø50 x 80 vertical sleeve with Ø30 through bore; upper-left Ø40 boss with Ø20 transverse bore connected by two parallel 10 mm tines separated by 6 mm; lower-right Ø40 boss with Ø20 transverse bore connected by a 10 mm inclined web. Boss lengths 20 and 30 mm. Some connector endpoint geometry is interpreted from the isometric and top projections where not fully dimensioned.

Parameters

Name	Value	Range
Central body outside diameter	50 mm	48 – 52
Central body height	80 mm	78 – 82
Central through bore	30 mm	28 – 32
Both transverse boss outside diameters	40 mm	38 – 42
Both transverse boss through holes	20 mm	18 – 22
Upper-left boss length	20 mm	18 – 22
Lower-right boss length	30 mm	28 – 32
Upper-left boss centre X	-37 mm	-40 – -34
Upper-left boss centre height	60 mm	58 – 62
Lower-right boss centre X	45 mm	42 – 48
Lower-right boss centre height	20 mm	18 – 22
Each upper fork tine width	10 mm	9 – 11
Gap between upper fork tines	6 mm	5 – 7
Lower inclined rib width	10 mm	9 – 11

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS