Everything else
Figure 4 - Continuous Central Support Revision
- Bounding box
- 120.0 × 50.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Revision correcting the previous full-height radial cut: central Ø50 x 80 support remains continuous; the 6 mm fork separation is limited to the upper-left extension. Boss and rib locations remain editable assumptions pending exact projection verification.
Parameters
| Name | Value | Range |
|---|---|---|
| Central body diameter | 50 mm | 45 – 55 |
| Central body height | 80 mm | 75 – 85 |
| Top opening diameter | 30 mm | 28 – 32 |
| Mounting boss outside diameter | 40 mm | 38 – 42 |
| Mounting boss hole diameter | 20 mm | 18 – 22 |
| Upper-left boss length | 20 mm | 12 – 30 |
| Lower-right boss length | 30 mm | 25 – 35 |
| Upper-left boss centre offset | 37 mm | 32 – 42 |
| Lower-right boss centre offset | 43 mm | 38 – 48 |
| Upper-left boss centre height | 60 mm | 55 – 65 |
| Lower-right boss centre height | 20 mm | 15 – 25 |
| Inclined rib thickness | 10 mm | 8 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm