Brackets and mounts
Fiat Punto Door Pocket (Simplified)
- Bounding box
- 370.0 × 60.0 × 58.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully parametric 3D model of an automotive storage compartment designed to be mounted on the interior door panel of a Fiat Punto (2013–2017). Overall dimensions: - Length: 180 mm - Width: 60 mm - Height: 50 mm Body: - Hollow box with 2.5 mm wall thickness. - Bottom thickness: 3 mm. - External corner radius: 4 mm. - Smooth rounded top edges. - Clean automotive-style design inspired by OEM interior trim. Sliding lid: - A sliding lid covering the top opening. - The lid must slide on two integrated rails printed as part of the main body. - No screws, magnets, springs, or metal hardware. - Clearance between the lid and rails: 0.3 mm for FDM printing. - The lid should open approximately 80% of the total length. - Include an integrated finger recess (15 mm wide × 5 mm deep) for opening. - Add built-in end stops so the lid cannot slide completely out of the rails. 3D printing requirements: - Optimized for FDM printing. - Printable without supports. - Maximum overhang angle: 45°. - Avoid unsupported bridges whenever possible. - Minimum feature thickness: 2 mm. - Design should print reliably on a standard Ender 3. Assembly: - Export as two separate solid bodies: 1. Main storage box. 2. Sliding lid. - The lid must assemble by sliding into the rails. Output: Generate a watertight, manifold 3D model ready for STL export, with dimensions preserved exactly and suitable for immediate 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Length | 180 mm | 100 – 300 |
| Box Width | 60 mm | 40 – 100 |
| Box Height | 50 mm | 30 – 80 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Bottom Thickness | 3 mm | 2 – 5 |
| Lid Plate Thickness | 5 mm | 3 – 10 |
| Lid Skirt Height | 3 mm | 2 – 8 |
| Clearance | 0.3 mm | 0.1 – 1 |
| Lid Travel | 140 mm | 50 – 180 |
| Finger Recess Length | 20 mm | 10 – 40 |
| Finger Recess Width | 15 mm | 10 – 40 |
| Finger Recess Depth | 5 mm | 1 – 10 |
| Stop Length | 10 mm | 5 – 20 |
| Stop Width | 10 mm | 5 – 20 |
| Stop Height | 5 mm | 2 – 10 |
| Layout Gap | 10 mm | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu