Brackets and mounts
Farm Stand Trailer Assembly
- Bounding box
- 6400.0 × 3478.0 × 4940.3 mm
- Engine
- Precision B-rep
- Parameters
- 50
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact single-axle farm stand trailer that looks like a small red wooden barn on wheels. It has a steel chassis frame with a single torsion drop axle and linear actuator mounted at the very rear so the deck can be lowered close to the ground when parked. Include a removable heavy steel box tubing tongue with standard hitch at the front. The body is wooden barn style with vertical red plank siding, white trim, and a pitched gable roof with a small cupola. One long side has a large panel that folds down to form a sturdy exterior wooden serving counter. A roof extension deploys outward and upward from the same side, providing at least 6 feet 8 inches of headroom underneath when open. When the deck is lowered the counter height must be between 36 and 42 inches from the ground. The entire open setup must fit inside a 10x10 foot area. In transport mode the trailer must stay under 8 feet 6 inches wide and 13 feet tall. Inside there is space for two freezers each measuring 31.2 inches wide by 22 inches deep by 33.5 inches high placed side by side along the back, two Mango 7kWh power stations each 17.8 by 13.6 by 19.4 inches near the freezers, and a wall area sized for a 40 inch LCD TV. Show the steel frame, wheels, fenders, actuator mechanism, hinges, and supports clearly. Make it look like a real towable trailer, not a static building. Highly detailed with realistic steel and wood materials. Show both closed transport mode and open vending mode.
Parameters
| Name | Value | Range |
|---|---|---|
| Mode (0=Transport, 1=Vending) | 0 | 0 – 1 |
| Ground to Chassis Bottom | 381 mm | 200 – 600 |
| Chassis Length | 3048 mm | 2000 – 5000 |
| Chassis Width | 1981 mm | 1500 – 2200 |
| Chassis Tube Thickness | 101.6 mm | 40 – 150 |
| Central Spine Width | 200 mm | 50 – 400 |
| Number of Crossmembers | 3 | 1 – 10 |
| Crossmember Width | 80 mm | 20 – 200 |
| Axle Offset from Rear | 305 mm | 100 – 800 |
| Wheel Track Width | 2184 mm | 1500 – 2591 |
| Axle Beam Radius | 20 mm | 10 – 50 |
| Tire Radius | 279 mm | 150 – 400 |
| Tire Width | 178 mm | 80 – 300 |
| Fender Length | 600 mm | 300 – 1200 |
| Fender Width | 250 mm | 150 – 400 |
| Fender Height | 380 mm | 200 – 600 |
| Fender Thickness | 5 mm | 2 – 15 |
| Tongue Length | 1524 mm | 500 – 2000 |
| Tongue Base Width | 100 mm | 50 – 200 |
| Tongue Height | 150 mm | 80 – 250 |
| Actuator X Offset from Rear | 200 mm | 50 – 500 |
| Actuator Body Radius | 50 mm | 20 – 100 |
| Actuator Retracted Length (Transport) | 250 mm | 100 – 500 |
| Actuator Extended Length (Vending) | 600 mm | 300 – 1000 |
| Deck Length | 2794 mm | 2000 – 4000 |
| Deck Width | 1880 mm | 1500 – 2100 |
| Deck Thickness | 50 mm | 20 – 100 |
| Deck Lowered Top Height (Vending) | 965 mm | 600 – 1200 |
| Barn Wall Height | 3048 mm | 2000 – 4000 |
| Wall Thickness | 51 mm | 20 – 100 |
| Roof Pitch (Angle) | 30 deg | 10 – 60 |
| Roof Overhang | 152 mm | 50 – 300 |
| Cupola Base Width | 400 mm | 200 – 600 |
| Cupola Base Height | 500 mm | 200 – 800 |
| Cupola Roof Height | 250 mm | 100 – 400 |
| Counter Panel Width | 2438 mm | 1500 – 3000 |
| Counter Panel Height | 1067 mm | 500 – 1500 |
| Counter Panel Thickness | 30 mm | 10 – 60 |
| Awning Length | 2500 mm | 1500 – 3500 |
| Awning Width | 1000 mm | 500 – 1500 |
| Awning Thickness | 30 mm | 10 – 60 |
| Freezer Depth (along X) | 559 mm | 300 – 800 |
| Freezer Width (along Y) | 792 mm | 500 – 1000 |
| Freezer Height | 851 mm | 500 – 1200 |
| Power Station Depth | 345 mm | 200 – 500 |
| Power Station Width | 452 mm | 200 – 600 |
| Power Station Height | 493 mm | 300 – 700 |
| TV Width | 885 mm | 500 – 1200 |
| TV Height | 498 mm | 300 – 700 |
| TV Depth | 50 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu