3D preview of Fan Duct Adapter 20mm to 93mm
Loading the interactive model…
Interactive 3D model of Fan Duct Adapter 20mm to 93mm

Everything else

Fan Duct Adapter 20mm to 93mm

1 views
Bounding box
89.6 × 97 × 128.5 mm
Engine
3D Printing B-rep
Parameters
8
Published
November 22, 2026

Download

Free to download and use. See the terms.

The prompt

I need an air duct that starts with a 2 cm × 2 cm square opening, followed by a 2 cm straight section. The duct should then make a smooth 90-degree bend to maintain optimal airflow, gradually expanding to accommodate a 9.3 cm × 9.3 cm fan. The bend radius and the length of the expansion section after the bend should be kept as short as possible, while still prioritizing efficient airflow and minimizing turbulence. At the 9.3 cm × 9.3 cm end, there should be a 2 mm wide retaining lip around the entire perimeter to securely hold the fan in place.

Parameters

NameValueRange
Square opening side20 mm10 – 60
Straight run before the bend20 mm5 – 80
Fan opening side93 mm40 – 200
Expansion run after the bend15 mm5 – 60
Centreline bend radius60 mm30 – 200
Wall thickness2 mm1.2 – 5
Retaining lip width2 mm1 – 6
Retaining lip thickness2 mm1 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Fan Duct Adapter 20mm to 93mm - Free CAD Model (STEP, STL) | TextoCAD