16.162.217.2
Loading the interactive model…
Interactive 3D model of Fan block cover chamber with 2 tubes

Everything else

Fan block cover chamber with 2 tubes

1 views
Bounding box
62.2 × 16.1 × 17.2 mm
Engine
3D Printing B-rep
Parameters
16
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

حجرة فوق الكتلة: الانحناء على اليمين، أنبوبان على الجهة المقابلة بروز 6 مم لتدفق 5 لتر/دقيقة، ارتفاع 16 مم، وكل القياسات أقل ربع مليمتر.

Parameters

NameValueRange
Length between the white lines54 mm30 – 80
Measured width, narrow part13 mm8 – 30
Measured width after the last bend14 mm8 – 30
Length of the wider part (right end) before the bend9 mm0 – 30
Length of the bend2.25 mm0.5 – 10
Inner cavity height16 mm2 – 30
Reduction applied to length and widths0.25 mm0 – 1
Extra length clearance0 mm0 – 1
Wall thickness1.2 mm0.8 – 4
Roof thickness1.2 mm0.8 – 4
Tube outer diameter9 mm5 – 12
Tube inner diameter7 mm3 – 10
Tube length sticking out of the wall6 mm2 – 20
Lower tube height above open face4.8 mm3 – 20
Upper tube height above open face12.4 mm3 – 25
Sideways offset of each tube from the centre line2.8 mm0 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Fan block cover chamber with 2 tubes - Free CAD Model (STEP, STL) | TextoCAD