Face Keychain

1 views

Bounding box: 50 × 50 × 3.4 mm
Engine: 3D Printing B-rep
Parameters: 11
Published: November 5, 2026

Download

Free to download and use. See the terms.

The prompt

Keep the keychain completely flat and straight, preserving exactly the original black and white areas from the uploaded image. Reproduce all shapes, outlines and proportions without adding colors, rounded reliefs, textures or 3D sculpting. The black and white regions must remain flat, clearly separated and aligned on the same front surface.

Parameters

Name	Value	Range
Overall width	50 mm	30 – 80
Overall height	50 mm	30 – 80
Main plate height	41 mm	20 – 60
Plate thickness	2.4 mm	1.2 – 5
Flat artwork layer thickness	1 mm	0.4 – 3
Artwork height on plate	38.5 mm	20 – 44
Keyring tab width	14 mm	8 – 26
Keyring hole diameter	5 mm	3 – 10
Keyring hole centre height	46 mm	38 – 58
Plate corner radius	5 mm	0 – 12
Min stroke half-width keeping fine lines printable	0.25 mm	0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS