Gears and transmission
Face Keychain
- Bounding box
- 50 × 50 × 3.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable keychain based on the reference image I uploaded. **EXACT DIMENSIONS:** - Main keychain body: 50 mm wide × 50 mm tall. - The entire keychain must fit within a 50 × 50 mm area. - The top attachment tab and its hole must be included within these dimensions. **DESIGN:** - Reproduce the uploaded image on the front surface. - Add one straight, centered rectangular tab at the TOP. - The tab must be aligned with the image and connected directly to the body. - Add one circular hole for a keyring. - Do not add a separate ring or chain. - Keep the original image recognizable and preserve its proportions. - Flat front and back surfaces. - Solid, durable and suitable for PLA 3D printing. - Create one single connected 3D model. Export as a watertight STL file ready for 3D printing. Do not exceed 50 × 50 mm in overall dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 50 mm | 30 – 80 |
| Overall height | 50 mm | 30 – 80 |
| Main plate height | 41 mm | 20 – 60 |
| Plate thickness | 2.4 mm | 1.2 – 5 |
| Artwork relief height | 1.2 mm | 0.4 – 3 |
| Artwork height on plate | 38.5 mm | 20 – 44 |
| Keyring tab width | 14 mm | 8 – 26 |
| Keyring hole diameter | 5 mm | 3 – 10 |
| Keyring hole centre height | 46 mm | 38 – 58 |
| Plate corner radius | 5 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled