Brackets and mounts
EYpot 2.6 Modular Self-Watering Pot - 4 Part Exploded Set
- Bounding box
- 100.0 × 100.0 × 100.1 mm
- Engine
- Precision B-rep
- Parameters
- 44
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a parametric 4-part modular self-watering plant pot assembly (EYpot Edition 2.6) with exact millimeter dimensions, 0.5mm fitting tolerances, and watertight wall geometries. Output four separate downloadable solid body models: PART 1: OUTER RESERVOIR SHELL - Geometry: Vertical cylinder, 100mm outer diameter, 100mm total exterior height, 2.5mm uniform wall thickness, 3mm solid bottom floor thickness. - Hexagon Window Matrix: On the outer wall, create a patterned array of 12 hollow hexagonal cutouts (10mm across flats) arranged in a 50mm-tall middle band starting 25mm down from the top rim. - Airflow Intake Slits: Cut 4 horizontal slots (10mm wide x 3mm high) through the outer wall, spaced evenly 90 degrees apart at a height of 50mm from the interior base floor. - Bottom Flush Drain Port: Cut an 8mm diameter horizontal circular hole through the outer side wall, centered 5mm above the outer bottom base. - Internal Overflow Standpipe: On the interior floor, construct a hollow vertical tube (10mm outer diameter, 6mm inner diameter) standing 45mm tall from the bottom inner floor. Connect the hollow core of this pipe directly to the 8mm horizontal bottom drain port so liquid over 45mm height drains automatically out the base. PART 2: INNER SOIL BASKET - Geometry: Inner hanging bucket, 94.5mm outer diameter (to fit inside the 95mm inner shell cavity), 80mm deep, 2mm wall thickness, 2.5mm bottom floor thickness. - Top Support Lip: Extend a flat outer flange at the top rim with a 100mm outer diameter and 3mm height to rest flush on top of Part 1. - Wick Holes: Punch 4 circular holes (5mm diameter each) through the bottom floor, arranged in a centered 40mm diameter circular pattern. PART 3: FLOATING DONUT GAUGE - Geometry: Buoyant hollow ring with 89mm outer diameter, 60mm inner diameter, 15mm height, and 1.2mm wall thickness. Fully sealed watertight interior cavity. - Central Guide Collar: Include a vertical center sleeve (18mm outer diameter, 12mm inner diameter, 20mm height) suspended in the center of the ring by 3 radial support struts (3mm width x 2mm thickness each). PART 4: TWO-COLOR INDICATOR SLEEVE - Geometry: Thin-walled vertical sleeve, 93.5mm outer diameter, 90.5mm inner diameter (1.5mm wall thickness), 95mm total height. - Upper Visual Band (Height 0mm to 47.5mm): Smooth outer surface colored solid purple. - Lower Visual Band (Height 47.5mm to 95mm): Smooth outer surface colored solid beige. - Lower Donut Mount: Bottom 5mm edge includes 3 interior snap-fit alignment tabs to lock onto Part 3.
Parameters
| Name | Value | Range |
|---|---|---|
| Shell Outer Diameter | 100 mm | 60 – 200 |
| Shell Exterior Height | 100 mm | 60 – 200 |
| Shell Wall Thickness | 2.5 mm | 1.2 – 6 |
| Bottom Floor Thickness | 3 mm | 1 – 10 |
| Hex Window A/F | 10 mm | 4 – 30 |
| Hex Window Count | 12 pcs | 4 – 24 |
| Hex Band Height | 50 mm | 10 – 90 |
| Hex Band Top Offset | 25 mm | 2 – 60 |
| Airflow Slit Count | 4 pcs | 2 – 8 |
| Slit Width | 10 mm | 2 – 30 |
| Slit Height | 3 mm | 1 – 10 |
| Slit Height Above Interior Floor | 50 mm | 5 – 80 |
| Drain Port Diameter | 8 mm | 2 – 20 |
| Drain Port Height Above Base | 5 mm | 1 – 30 |
| Standpipe Outer Diameter | 10 mm | 5 – 25 |
| Standpipe Bore Diameter | 6 mm | 2 – 20 |
| Standpipe Height | 45 mm | 10 – 90 |
| Basket Outer Diameter | 94.5 mm | 40 – 190 |
| Basket Wall Thickness | 2 mm | 1 – 6 |
| Basket Floor Thickness | 2.5 mm | 1 – 8 |
| Basket Interior Depth | 80 mm | 20 – 160 |
| Support Flange Outer Diameter | 100 mm | 40 – 210 |
| Support Flange Height | 3 mm | 1 – 10 |
| Wick Hole Diameter | 5 mm | 1 – 20 |
| Wick Hole Bolt Circle | 40 mm | 10 – 80 |
| Wick Hole Count | 4 pcs | 2 – 8 |
| Donut Outer Diameter | 89 mm | 50 – 170 |
| Donut Inner Diameter | 60 mm | 20 – 150 |
| Donut Height | 15 mm | 5 – 60 |
| Donut Wall Thickness | 1.2 mm | 0.8 – 5 |
| Guide Collar Outer Diameter | 18 mm | 8 – 40 |
| Guide Collar Bore | 12 mm | 4 – 34 |
| Guide Collar Height | 20 mm | 5 – 60 |
| Radial Strut Count | 3 pcs | 2 – 6 |
| Strut Width | 3 mm | 1 – 10 |
| Strut Thickness | 2 mm | 1 – 10 |
| Sleeve Outer Diameter | 93.5 mm | 40 – 190 |
| Sleeve Inner Diameter | 90.5 mm | 30 – 180 |
| Sleeve Height | 95 mm | 20 – 200 |
| Snap Tab Count | 3 pcs | 2 – 8 |
| Snap Tab Protrusion | 2 mm | 0.5 – 6 |
| Snap Tab Width | 5 mm | 2 – 20 |
| Snap Tab Height | 5 mm | 1 – 20 |
| Exploded Layout Gap | 20 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu