Brackets and mounts
Extended ACCU Cantilever Mounting Bracket
- Bounding box
- 600.0 × 620.0 × 400.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Provide an extended ACCU mounting bracket to accommodate the required support beyond the existing ledge projection, subject to approved installation details. The bracket assembly, anchors, and supporting structure shall be verified for the equipment operating weight and applicable loads. The required extension, bracket material, anchorage arrangement, and mounting points shall be established through actual site measurements and engineering verification. The proposed solution is intended to address the limited ledge projection without automatically requiring concrete ledge modification. Any structural alteration shall be subject to the appropriate engineering assessment and written approval. Take note that this is surface mounted for ACCU compartment with limited ledges
Parameters
| Name | Value | Range |
|---|---|---|
| Back Plate Width | 600 mm | 300 – 1200 |
| Back Plate Height | 400 mm | 200 – 900 |
| Back Plate Thickness | 10 mm | 6 – 25 |
| Cantilever Arm Length | 500 mm | 200 – 1200 |
| Arm Width | 80 mm | 40 – 200 |
| Arm Thickness | 8 mm | 5 – 20 |
| Arm Top Elevation | 100 mm | 0 – 180 |
| Front Rail Length | 600 mm | 300 – 1200 |
| Front Rail Height | 80 mm | 40 – 200 |
| Front Rail Thickness | 8 mm | 5 – 20 |
| Mounting Slot Length | 70 mm | 30 – 150 |
| Mounting Slot Width | 14 mm | 8 – 30 |
| Rear Brace Length | 500 mm | 200 – 1200 |
| Rear Brace Height | 60 mm | 30 – 150 |
| Rear Brace Thickness | 8 mm | 5 – 20 |
| Gusset Horizontal Leg | 300 mm | 100 – 600 |
| Gusset Vertical Leg | 80 mm | 40 – 250 |
| Gusset Thickness | 8 mm | 5 – 20 |
| Anchor Diameter (M) | 12 mm | 8 – 24 |
| Anchor Embedment Length | 120 mm | 60 – 300 |
| Washer Outside Diameter | 24 mm | 16 – 48 |
| Washer Thickness | 2.5 mm | 1 – 8 |
| Nut Across Flats | 19 mm | 10 – 46 |
| Nut Thickness | 10 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu