Brackets and mounts
Exploded Wall-Mounted Water Purifier Assembly
- Bounding box
- 6160.0 × 185.0 × 600.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric 3D CAD assembly model of a wall-mounted smart water purifier appliance featuring an integrated Electronic Control Unit (ECU) self-diagnostic system. The enclosure is a vertical, rectangular chassis with dimensions of 320mm in width, 180mm in depth, and 480mm in height, featuring smooth 15mm rounded vertical edges. Divide the internal chassis into three isolated structural compartments using 3mm horizontal bulkheads: a top sealed electronics bay, a middle fluid filtration bay, and a bottom mechanical pump bay. The top bay houses a 120mm x 80mm surface-mounted PCB controller board with standoffs, aligned behind a front-panel 2-inch rectangular OLED display window. The middle bay contains two parallel 80mm diameter by 300mm height cylindrical filter cartridges mounted vertically via snap-fit bracket clips, connected with 1/4-inch tubing connectors. The bottom bay houses an offset 100mm x 90mm x 70mm BLDC booster pump assembly mounted on four 10mm cylindrical rubber vibration dampers. Render the model in a clean, exploded-view CAD style with distinct solid bodies, crisp feature edges, and transparent outer cabinet paneling to reveal internal component layout and wiring harness routing.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 500 mm | 200 – 1000 |
| Cabinet Width | 320 mm | 100 – 500 |
| Cabinet Depth | 180 mm | 80 – 300 |
| Cabinet Height | 480 mm | 200 – 700 |
| Vertical Edge Radius | 15 mm | 1 – 30 |
| Wall Thickness | 3 mm | 1 – 10 |
| Front Window Width | 200 mm | 50 – 300 |
| Front Window Height | 320 mm | 100 – 450 |
| Side Window Depth | 100 mm | 40 – 170 |
| Side Window Height | 320 mm | 100 – 450 |
| Wall Bracket Width | 200 mm | 80 – 300 |
| Wall Bracket Height | 150 mm | 50 – 300 |
| Wall Bracket Thickness | 5 mm | 2 – 15 |
| Bulkhead Thickness | 3 mm | 1 – 10 |
| PCB Length | 120 mm | 50 – 200 |
| PCB Width | 80 mm | 30 – 150 |
| PCB Thickness | 2 mm | 1 – 5 |
| Standoff Height | 8 mm | 3 – 20 |
| Standoff Diameter | 6 mm | 2 – 12 |
| OLED Display Length | 50 mm | 20 – 100 |
| OLED Display Width | 30 mm | 15 – 70 |
| OLED Display Thickness | 5 mm | 1 – 12 |
| Filter Cartridge Diameter | 80 mm | 30 – 150 |
| Filter Cartridge Height | 300 mm | 100 – 500 |
| Filter Connector Outer Diameter | 10 mm | 5 – 20 |
| Filter Connector Length | 15 mm | 5 – 40 |
| Filter Bracket Length | 320 mm | 150 – 500 |
| Filter Bracket Width | 100 mm | 50 – 200 |
| Filter Bracket Height | 20 mm | 5 – 40 |
| Filter Bracket Hole Diameter | 82 mm | 60 – 120 |
| Tubing Outer Diameter | 10 mm | 4 – 20 |
| Tubing Segment Length | 200 mm | 50 – 400 |
| Quick-Connect Body Diameter | 12 mm | 6 – 25 |
| Quick-Connect Body Length | 18 mm | 5 – 40 |
| Pump Length | 100 mm | 50 – 180 |
| Pump Width | 90 mm | 40 – 150 |
| Pump Height | 70 mm | 30 – 120 |
| Pump Motor Diameter | 45 mm | 20 – 80 |
| Pump Motor Length | 60 mm | 20 – 100 |
| Vibration Damper Diameter | 10 mm | 5 – 20 |
| Vibration Damper Height | 15 mm | 5 – 30 |
| Wiring Harness Diameter | 8 mm | 3 – 20 |
| Wiring Harness Length | 500 mm | 200 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu