Exploded Section - Retaining Wall and Ventilated Foundation

1 views

Bounding box: 235 × 60 × 160 mm
Engine: 3D Printing B-rep
Parameters: 20
Published: November 4, 2026

Download

Free to download and use. See the terms.

The prompt

generami un esploso tridimensionale sulla base dell'immagine allegata

Parameters

Name	Value	Range
Section width along Y	60 mm	30 – 120
Retaining wall thickness	40 mm	20 – 80
Retaining wall height	145 mm	60 – 250
Footing heel thickness	12 mm	6 – 30
Footing heel extension	45 mm	10 – 100
Drainage gravel width	40 mm	20 – 100
Drainage gravel height	108 mm	40 – 200
Slab thickness	30 mm	10 – 60
Slab length	150 mm	60 – 300
Thermal insulation thickness	14 mm	4 – 40
Screed thickness	10 mm	4 – 30
Wood flooring thickness	4 mm	2 – 10
Brick infill wall thickness	30 mm	10 – 60
Brick infill wall height	130 mm	40 – 250
Metal grate thickness	6 mm	3 – 15
Number of floor planks	5 mm	2 – 12
Gap between planks	1 mm	0.4 – 3
Number of grate slots	4 mm	2 – 8
Grate bar width	3 mm	1.5 – 6
Explode factor (0 = assembled)	0 mm	0 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS