Everything else
Exploded Multi-Part Layout: Zigzag Plate, Diamond Frame & Blocks
- Bounding box
- 2680.0 × 240.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
RECTANG 0,0 500,50 OFFSET 5 0,0 0,-5 PLINE 0,0 @10,2 @10,-2 @10,2 @10,-2 @10,2 @10,-2 @10,2 @10,-2 @10,2 @10,-2 POLYGON 6 50,25 I 1.0 RECTANG 52,24 53,24.5 FILLET R 0.2 FILLET 52,24 53,24.5 SNAP S I LINE 100,100 @200<30 @200<150 @200<210 @200<330 LINE 100,100 @40<270 LINE 273.2,200 @40<270 LINE 100,200 @40<270 SNAP S S RECTANG 300,100 360,140 RECTANG 400,100 460,140 RECTANG 500,100 560,140 MLEADER 360,120 400,120 ZOOM E
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 500 mm | 100 – 2000 |
| Plate Width | 50 mm | 10 – 500 |
| Plate Thickness | 5 mm | 1 – 50 |
| Zigzag Edge Length | 100 mm | 5 – 400 |
| Zigzag Amplitude | 2 mm | 0.2 – 20 |
| Zigzag Segments | 10 pcs | 2 – 40 |
| Hex Hole Circumradius | 1 mm | 0.2 – 10 |
| Hex Hole X (from left edge) | 50 mm | 0 – 500 |
| Hex Hole Y (from bottom edge) | 25 mm | 0 – 50 |
| Slot Length | 1 mm | 0.2 – 20 |
| Slot Width | 0.5 mm | 0.2 – 20 |
| Slot Corner Fillet | 0.2 mm | 0.01 – 5 |
| Slot X (from left edge) | 52 mm | 0 – 500 |
| Slot Y (from bottom edge) | 24 mm | 0 – 50 |
| Diamond Width | 346 mm | 50 – 1000 |
| Diamond Height | 200 mm | 20 – 800 |
| Frame Wall Thickness | 12 mm | 2 – 40 |
| Frame Thickness | 10 mm | 1 – 60 |
| Leg Length | 40 mm | 5 – 200 |
| Leg Width | 10 mm | 2 – 60 |
| Block Size X | 60 mm | 10 – 300 |
| Block Size Y | 40 mm | 10 – 300 |
| Block Height | 20 mm | 2 – 200 |
| Layout Gap (X spacing) | 600 mm | 100 – 3000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm