Brackets and mounts
Exploded Industrial Robot Electronics Enclosure (12 parts)
- Bounding box
- 6806.0 × 310.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 61
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D CAD model of a protective electronics enclosure for an autonomous industrial cleaning robot operating near high temperatures and strong magnetic fields. Design requirements: * Rectangular metal enclosure with a removable bolted lid. * Outer shell: 5 mm mild steel. * Inner magnetic shielding liner: 1 mm mu-metal. * High-temperature thermal insulation between the shell and electronics compartment. * Internal mounting plate for an onboard computer, motor drivers, IMU, and communication modules. * Cooling fan and heat sink, positioned to avoid direct exposure of electronics to external hot air. * Sealed cable glands on one side for protected cable entry. * Gasket around the lid and mounting brackets on the base. * Separate components so the enclosure can be viewed as an exploded assembly. * Use millimetres and create editable solid geometry. * Produce a practical conceptual design, not just a visual rendering. * Export the complete model as STEP and individual components where possible.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Spacing | 600 mm | 100 – 2000 |
| Shell Length (X) | 400 mm | 100 – 1000 |
| Shell Width (Y) | 300 mm | 100 – 1000 |
| Shell Height (Z) | 200 mm | 50 – 600 |
| Shell Wall | 5 mm | 2 – 20 |
| Top Flange Ring Width | 10 mm | 5 – 40 |
| Top Flange Thickness | 10 mm | 3 – 30 |
| Flange Bolt Hole Dia (M6 clearance) | 6.6 mm | 3 – 15 |
| Lid Length (X) | 410 mm | 100 – 1000 |
| Lid Width (Y) | 310 mm | 100 – 1000 |
| Lid Thickness | 5 mm | 1 – 30 |
| Gasket Length (X) | 410 mm | 100 – 1000 |
| Gasket Width (Y) | 310 mm | 100 – 1000 |
| Gasket Thickness | 3 mm | 1 – 15 |
| Liner Length (X) | 380 mm | 100 – 1000 |
| Liner Width (Y) | 280 mm | 100 – 1000 |
| Liner Height (Z) | 180 mm | 50 – 600 |
| Liner Wall | 1 mm | 0.5 – 5 |
| Insulation Thickness | 10 mm | 2 – 50 |
| Insulation Height | 190 mm | 50 – 400 |
| Mounting Plate Length (X) | 360 mm | 100 – 900 |
| Mounting Plate Width (Y) | 260 mm | 100 – 900 |
| Mounting Plate Thickness | 3 mm | 1 – 20 |
| Standoff Height | 10 mm | 2 – 50 |
| Standoff Diameter | 8 mm | 3 – 20 |
| M4 Thread Hole Dia | 3.3 mm | 1 – 10 |
| Payload Length (X) | 300 mm | 50 – 800 |
| Payload Width (Y) | 200 mm | 50 – 600 |
| Payload Height | 80 mm | 20 – 300 |
| Fan Frame Length (X) | 80 mm | 20 – 300 |
| Fan Frame Width (Y) | 80 mm | 20 – 300 |
| Fan Thickness | 25 mm | 5 – 80 |
| Fan Bore Diameter | 70 mm | 20 – 290 |
| Fan Mount Hole Dia | 4.5 mm | 2 – 10 |
| Heat Sink Length (X) | 100 mm | 20 – 400 |
| Heat Sink Width (Y) | 100 mm | 20 – 400 |
| Heat Sink Base Thickness | 5 mm | 1 – 30 |
| Fin Height | 35 mm | 5 – 200 |
| Fin Thickness | 3 mm | 1 – 10 |
| Fin Count | 10 mm | 2 – 30 |
| Gland Hex Size (across flats) | 24 mm | 10 – 50 |
| Gland Hex Body Length | 15 mm | 3 – 60 |
| Gland Barrel Diameter | 16 mm | 5 – 60 |
| Gland Barrel Length | 25 mm | 5 – 80 |
| Gland Locknut Hex Size | 26 mm | 10 – 60 |
| Gland Locknut Thickness | 5 mm | 2 – 20 |
| Gland Cable Bore | 10 mm | 3 – 40 |
| Gland Spacing | 40 mm | 20 – 200 |
| Bracket Leg Length | 60 mm | 10 – 300 |
| Bracket Leg Height | 40 mm | 10 – 300 |
| Bracket Thickness | 6 mm | 2 – 20 |
| Bracket Width | 40 mm | 5 – 200 |
| Bracket Hole Dia | 8 mm | 2 – 20 |
| Bracket Spacing | 80 mm | 50 – 300 |
| Bolt Nominal Dia (M6) | 6 mm | 2 – 20 |
| Bolt Shank Length | 20 mm | 5 – 100 |
| Bolt Head Hex Size | 10 mm | 4 – 40 |
| Bolt Head Height | 4 mm | 1 – 20 |
| Washer Outer Dia | 12 mm | 4 – 40 |
| Washer Thickness | 1.6 mm | 0.5 – 5 |
| Bolt Spacing in Layout | 20 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu