Plates and panels
Exploded 3-Storey Building Model with Engraved Room Numbers
- Bounding box
- 400.0 × 300.0 × 217.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Please modify the previous model with the following corrections to arrange it as a proper building with correct room numbering: 1. VERTICAL STACKING (Z-AXIS): Do NOT place the floors side-by-side on the floor. Stack them vertically on top of each other along the Z-axis to form a multi-story building. Add a vertical gap (separation distance) between Level 1, Level 2, and Level 3 so it looks like an exploded 3D architectural stack. 2. ROOM NUMBERING & TEXT INSCRIPTIONS: - For LEVEL 1 (Bottom floor): Engrave or extrude text labels on each room floor using the prefix "1-xx" (from 1-01 up to 1-12, corresponding to the original positions of rooms 2-01 to 2-12). - For LEVEL 2 (Middle floor): Keep the text labels exactly as the original schema, from 2-01 up to 2-12. - For LEVEL 3 (Top floor): Engrave or extrude text labels on each room floor using the prefix "3-xx" (from 3-01 up to 3-12). 3. ALIGNMENT: Ensure all three floor plates are perfectly aligned horizontally (X and Y axes) so they match perfectly if they were compressed into a single closed building.
Parameters
| Name | Value | Range |
|---|---|---|
| Floor plate width | 400 mm | 200 – 700 |
| Floor plate depth | 300 mm | 150 – 600 |
| Floor plate thickness | 8 mm | 3 – 20 |
| Plan border margin | 10 mm | 0 – 40 |
| Wall thickness | 4 mm | 1.5 – 12 |
| Wall height | 25 mm | 5 – 60 |
| Rooms per side row | 3 ea | 1 – 4 |
| Vertical floor separation (exploded gap) | 60 mm | 5 – 200 |
| Room label height | 10 mm | 3 – 30 |
| Room label engraving depth | 1.5 mm | 0.3 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Exploded Axonometric Section - Excavation, Raft Foundation and Retaining Wall
generami un esploso assonometrico a 30 gradi, in cui mi fai vedere il terreno, scavo a platea con casseri a perdere, plinti, pilastro e tutti gli altri componenti
Two-Deck Sumobot Chassis with Armour and Scoop
make the first plate and second plate the same, just flat. On the bottom make cutouts to where the wheel is supposed to go. attaching to the first base plate, should be a ledge tha