Plates and panels
Exploded Axonometric Section - Excavation, Raft Foundation and Retaining Wall
- Bounding box
- 372.5 × 281.5 × 205 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
generami un esploso assonometrico a 30 gradi, in cui mi fai vedere il terreno, scavo a platea con casseri a perdere, plinti, pilastro e tutti gli altri componenti
Parameters
| Name | Value | Range |
|---|---|---|
| Section width along Y | 60 mm | 30 – 120 |
| Retaining wall thickness | 40 mm | 20 – 80 |
| Retaining wall height | 145 mm | 60 – 250 |
| Footing heel thickness | 12 mm | 6 – 30 |
| Footing heel extension | 45 mm | 10 – 100 |
| Drainage gravel width | 40 mm | 20 – 100 |
| Drainage gravel height | 108 mm | 40 – 200 |
| Slab thickness | 30 mm | 10 – 60 |
| Slab length | 150 mm | 60 – 300 |
| Thermal insulation thickness | 14 mm | 4 – 40 |
| Screed thickness | 10 mm | 4 – 30 |
| Wood flooring thickness | 4 mm | 2 – 10 |
| Brick infill wall thickness | 30 mm | 10 – 60 |
| Brick infill wall height | 130 mm | 40 – 250 |
| Metal grate thickness | 6 mm | 3 – 15 |
| Number of floor planks | 5 mm | 2 – 12 |
| Gap between planks | 1 mm | 0.4 – 3 |
| Number of grate slots | 4 mm | 2 – 8 |
| Grate bar width | 3 mm | 1.5 – 6 |
| Terrain margin around the pit | 35 mm | 10 – 80 |
| Excavation depth | 34 mm | 10 – 80 |
| Cassero a perdere thickness | 6 mm | 2 – 15 |
| Number of plinths | 2 mm | 1 – 4 |
| Plinth base width | 26 mm | 14 – 60 |
| Plinth top width | 18 mm | 8 – 50 |
| Plinth height | 30 mm | 10 – 80 |
| Column cross-section | 16 mm | 8 – 60 |
| Column top height from base | 140 mm | 40 – 250 |
| Explode factor (0 = assembled) | 1 mm | 0 – 2 |
| Axonometric rotation about Z | 30 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four