3D preview of Experimental Fixed-Wing Aircraft
Loading the interactive model…
Interactive 3D model of Experimental Fixed-Wing Aircraft

Everything else

Experimental Fixed-Wing Aircraft

1 views
Bounding box
285 × 450 × 81.2 mm
Engine
3D Printing B-rep
Parameters
23
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Create a realistic 3D CAD model of an experimental fixed-wing aircraft exactly matching the configuration and appearance of the provided reference image. Use a streamlined fuselage of 280 mm length, a straight rectangular main wing with 450 mm wingspan and 80 mm chord, and a cambered NACA 2412 airfoil. Position the wing 80 mm behind the nose, with zero sweep and zero dihedral. Include a conventional rear horizontal stabilizer with 140 mm span, 60 mm chord and symmetrical NACA 0010 airfoil, positioned near the rear of the fuselage. Add a single vertical trapezoidal stabilizer with 65 mm height, 55 mm root chord and 30 mm tip chord, including a rudder. Mark the initial CG at 25% wing chord (20 mm behind the wing leading edge, X = 100 mm from the nose), with adjustable ballast provision. Design for a target positive 10% static margin, verifying the neutral point before finalizing CG. Maintain accurate aerodynamic shapes, bilateral symmetry and realistic proportions. Create separate printable components for the fuselage, wing and tail assembly. Provide assembled isometric, top, front and side views with dimensions and CG marking. Do not change the specified dimensions or aircraft configuration.

Parameters

NameValueRange
Fuselage length, nose to tail280 mm120 – 400
Maximum fuselage diameter30 mm12 – 60
Ballast bay station from nose100 mm40 – 200
Ballast bay bore14 mm6 – 24
Canopy centre from nose45 mm10 – 150
Canopy top height above datum21 mm8 – 40
Wingspan450 mm150 – 800
Wing chord80 mm30 – 200
Wing leading edge from nose80 mm0 – 200
Wing chord-line height16 mm5 – 60
NACA 2412 thickness (% chord)12 mm6 – 20
Horizontal stabilizer span140 mm60 – 300
Horizontal stabilizer chord60 mm20 – 150
H-stab leading edge from nose205 mm120 – 300
H-stab chord-line height8 mm0 – 40
NACA 0010 thickness (% chord)10 mm6 – 18
Vertical stabilizer height65 mm20 – 150
Vertical stabilizer root chord55 mm15 – 150
Vertical stabilizer tip chord30 mm10 – 120
V-stab root leading edge from nose210 mm120 – 300
Fin thickness4 mm2 – 10
Rudder chord20 mm8 – 40
Rudder thickness3.5 mm2 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Experimental Fixed-Wing Aircraft - Free CAD Model (STEP, STL) | TextoCAD